Operation Manual

Settings menu
Indicator of the setting
menu
Description Value to set
SET1 SET+GO ON / OFF
SET2 RESIDUAL HEAT INDI-
CATOR
ON / OFF
SET3
1)
KEY TONE CLICK / BEEP / OFF
SET4 FAULTY TONE ON / OFF
SET5 SERVICE MENU ON / OFF
SET6 RESTORE SETTINGS YES / NO
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
You can set the settings menu
only when the appliance is off.
Activate the Settings menu:
1.
If necessary, deactivate the appli-
ance
.
2.
Touch and hold for three sec-
onds.
The display shows "SET1" and "1"
flashes.
3.
Touch / to set the setting.
4.
Touch .
5.
Touch / to change the value
of the setting.
6.
Touch .
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates automatically after some time:
• if an oven function operates.
• if you do not change the oven temper-
ature.
Temperature Switch-off time
30 °C - 115 °C 12.5 h
120 °C - 195 °C 8.5 h
200 °C - 245 °C 5.5 h
250 °C - maximum °C 3.0 h
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off works
with all oven functions, apart
from Slow Cook, Core tempera-
ture sensor, Duration, End, Time
delay.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– When the appliance is activated.
– If you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– If the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
10.7 Cooling fan
When the appliance operates, the cool-
ing fan activates automatically to keep
18
www.aeg.com