BE7304021 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 8 9 11 13 16 17 19 21 25 26 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information 5 • You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. • Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable. • Make sure that the appliance is installed below and adjacent safe structures. • Keep the minimum distances to the other appliances and units. • The appliance cannot be positioned on a base.
Safety information • Do not apply pressure on the open door. • Always close the appliance door when you cook, even while grilling. Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 • Use only original spare parts. Disposal of the appliance • To prevent the risk of physical injury or damage – Disconnect the appliance from the power supply. – Cut off the mains cable and discard it. – Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
Before first use Oven accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Combi pan For cake and biscuits. To bake and roast or as pan to collect fat. • Core Temperature Sensor To measure how far the food is cooked. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter.
Control panel 9 Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds. For the subsequent few seconds the display shows software version. First setting the time of day After the software version goes off, the display shows "h" and "12:00". Setting the time of day: or to set hours. 1. Touch or . 2.
Control panel Sensor Field Function Description 3 OPTIONS To set an oven function or programme. Straight access to the oven function when the appliance is off. 4 MY FAVOURITE PROGRAMME You can store your favourite programme. Use it to access your favourite programme directly, also when the appliance is off. 5 TEMPERATURE / FAST HEAT UP To set and examine cavity temperature or core temperature sensor temperature.
Daily use 11 6 Heat up indicator 7 Number of oven function/programme Other indicators of display Symbols / / Name Description Options You can choose an oven function. Automatic programme You can choose an oven programme. My favourite programme The favourite programme operates. kgr/gr An oven programme with weight input operates. h/min A clock function operates. Temperature / fast heat up The function operates. Temperature You can examine or change the temperature.
Daily use Oven function Application 1 True Fan Cooking 2 Pizza Setting 3 Slow Cook 4 Conventional Cooking To bake and roast food on one shelf position. 5 Frozen Foods To make your convenience food like e.g. French Fries, Wedges, spring rolls crispy. 6 Turbo Grilling To roast larger meat joints or poultry with bones on one shelf position. Also to brown food, for example gratin.
Clock functions 13 2. Touch to go back to the set temperature or the display will show it automatically after five seconds. Fast heat up function The fast heat up function decreases the heat up time. Do not put food in the oven when the fast heat up function operates. for more then three seconds. Activating the fast heat up function : Touch and hold If you activate the fast heat up function, the bars on the display flash one by one to show that the function operates.
Clock functions SYMBOL FUNCTION DESCRIPTION SET+GO To start the appliance with necessary settings with only one touch of the sensor field, any time later. Count Up Timer Use the Count Up Timer to monitor how long the appliance operates. It is on immediately when the appliance starts to heat. Reset the Count Up Timer: touch again and again until flashes in the display. until the display shows "00:00" and the Count Up Timer starts to count up Touch again.
Clock functions 15 Setting the SET+GO To start of the appliance with necessary settings with only one touch of the sensor field, any time later. 1. Set an oven function (or programme) and temperature (refer to "Setting the oven function" and "Changing the oven temperature"). 2. Set DURATION (refer to "Setting the DURATION"). 3. Touch again and again until will flash in the display. to set the SET+GO function. 4. Touch The display shows and with a dot. This dot shows which clock function is activated. 5.
Automatic programmes AUTOMATIC PROGRAMMES WARNING! Refer to "Safety information" chapter. There are 20 automatic programmes and recipes. Use an automatic programme or recipe when you do not have a knowledge or experience how to prepare a dish. You can find the recipes for the automatic programmes in the "Recipe book".
Using the accessories 17 When a core temperature sensor programme is set, the display shows the cooking . time, and or the settings save automatically after five seconds. 4. Touch 5. When set time ends, an acoustic signal operates for two minutes. flashes. The appliance deactivates. 6. Touch any sensor field or open the oven door to stop an acoustic signal. My favourite programme function Use this function to save your favourite settings of temperature and time for oven function or programme. 1.
Using the accessories 2. Put the point of the core temperature on the sensor (with the symbol handle) into the centre of the meat. 3. Put the plug of the core temperature sensor into the socket at the front of the appliance. The display shows a flashing symbol and the default set core temperature. The temperature is 60 °C during the first use, and the last set value during each subsequent use. or to set the core temper4. Touch ature. or the settings save automat5. Touch ically after 5 seconds.
Additional functions 19 When you cook with the core temperature sensor, you can change the temperature shown in the Temperature/Time display. After you put the core temperature sensor in the socket and set an oven function and temperature, the display shows the current core temperature. Touch again and again to see three other temperatures: • The current core temperature • The oven set temperature • The current oven temperature.
Additional functions 2. Touch and hold and at the same time for minimum 2 seconds. 3. An acoustic signal sounds. SAFE goes on in the display when you touch any key. If the oven has "Pyro Cleaning" function, the door is locked. Control Lock The Control Lock prevents you to accidentally change the oven functions. You can activate the Control Lock only when the appliance operates. Activate the Control Lock: 1. If necessary, activate the appliance. 2. Do the necessary settings. at the same time. 3.
Care and cleaning 3. 4. 5. 6. 21 The display shows "SET1" and "1" flashes. / to set the setting. Touch . Touch / to change the value of the setting. Touch . Touch Automatic switch-off For safety reasons the appliance deactivates automatically after some time: • if an oven function operates. • if you do not change the oven temperature. Oven temperature Switch-off time 30 °C -120 °C 12.5 h. 120 °C - 200 °C 8.5 h. 200 °C -250 °C 5.5 h. 250 °C -maximum °C 3.0 h.
Care and cleaning Notes on cleaning: • Clean the front of the appliance with a soft cloth with warm water and cleaning agent. • To clean metal surfaces use a usual cleaning agent • Clean the oven interior after each use. Thus you can remove dirt more easily and it does not burn on. • Clean stubborn dirt with a special oven cleaner. • Clean all oven accessories (with a soft cloth with warm water and cleaning agent) after each use and let them dry.
Care and cleaning 23 Folding down the heating element 1. Remove the shelf support. 2. Hold the heating element with the two hands at the front 3. Pull it forwards against the spring pressure and out along the support on both sides. 4. The heating element folds down. The oven ceiling is ready to clean. Installing the heating element 1. Install the heating element in opposite sequence. Install the heating element correctly on the two sides above the support on the inner wall of the appliance. 2.
Care and cleaning 2. Use a narrow, blunt object (for example a teaspoon) to remove the glass cover. Clean the glass cover. 3. If necessary, replace the oven lamp with applicable 300°C heat-resistant oven lamp. Use the same oven lamp type. 4. Install the glass cover. 5. Install the left shelf rail. Oven door and glass panels To clean the oven door, remove it. CAUTION! Be careful when you remove the door from the appliance. The door is heavy! Removing the oven door 1.
What to do if… 25 2. Hold the door t (B) on the top edge of the door at the two sides and push inwards to release the clip seal. 3. Pull the door t to the front to remove it. B 4. Hold the door glass panels on their top edge one by one and pull them up out of the guide 5. Clean the door glass panels. To install panels follow the procedure in reverse. Install the smaller panel first, then the larger. WHAT TO DO IF… WARNING! Refer to "Safety information" chapter.
Environment concerns If you cannot find a solution to the problem yourself, contact your dealer or the service centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) ......................................... ......................................... .........................................
www.aeg-electrolux.
