Before continuing The Electricity Board’s regulations concerning connection must be strictly adhered to, Your oven must be installed by a qualified electrician, This appliance complies with the requirements fad ot In the EEC Directive 76/889.
Features (D Top oven with oven fight, thermostat and variable grit, plus removable lift-up road. @ Temperature control for the upper oven. @ Control knob for the variable girl element in the upper oven. ® Catalytic lest-cloan main oven with thermostat, oven light and with complete rotisserie equipment.
Before using for the first time How to open the door of the upper oven Pl the door forward by the handier and push it up. Warming: When operating coaching appliances their surtaxes become hot 50 please take care Keep young children away from cookers, as a precaution. Oven coating Tha vitreous enamel in your oven is very durable. However, vitreous enamel js. adversely affected by fruit acids (rhubarb, lemon etc) and tea which will discolor and dull the enamel. The performance of the oven is not affected.
Equipment Secondary oven M Plug-in frig element W Meatball pan W Reversible wire shelf Lower oven | Moat pan W Rotisserie frame and spit (2} & Wire shell (2 Shell The secondary oven has two shelf positions positions (D and whereas the man oven offers four shelf positions (B, @, & and @ for the rotisserie frame, the meat pan and the shaves. The girl element in the secondary oven can be removed when the oven is used for cooking, or when the oven needs cleaning.
Switching on and off Red temperature Temperature control fight for contort for secondary oven secondary oven Yellow pilot light {is on when main errand secondary ovens are switched on Arable frig element contort knob Red temperature Temperature control fight for: contort for the the main vane main oven = Both ovens can be operated together or independently from each other. Switching an Turn the oven controls clockwise untie the required temperature of the il symbol is displayed against the marker.
Roasting, casseroles etc. Actinium tol Do not line the oven with aluminum foil as this will result i a heat build up and may destroy the enamel. = Consult the AEG recipe book for desalts concerning coaching temperatures, times and sheaf positions. i you need to preheat the oven, Walt until the red contra light goes out for the first time. Then place the food in the oven and close the oven soot. The temperatures, times and runner positions fn the top oven are the same a8 in the lower oven.
Spit roasting in the lower oven You will require the brasserie, the support frame and the drip pan for spit roasting. Pr-heat the oven at 250 °C until the red tight goes put. Prepare the spiff, slide one of the forks onto the spit and tighten the screw. Next put on the joint, then insert the secant fork into the joint and tighten the sower. Fit the handier by giving a slight push and & quarter tum. Insert the support frame on the third runner from the bottom of the oven.
Baking Consult the AEG recipe boa for cooking times, temperatures and shanghai positions, Switching Tum the oven switch to the required an temperature. When per-hesting, place the cakes in the oven when the red control light has game out. He hing Return oven switch 0 0", Residual heat can be urged for up to 5 minutes after switching the oven off, Sterilizing (Preserving) ~ in the main oven only — Gen erst points Use only standard jars with rubber seals and glass or metal lids suitable for bailing.
To set the clock and the minute minder Digital The digital clock @ of your oven will clock always show you the correct time of day. cultist calcified a digital clock, because it shows the time in digits and not by the conventional method of hands. Sating the To set the clock, e.g. when using the . Pull out knob @ the digits will rotate cloak poker for the first time or after a power in & seeded up fashion cit, proceed as follows: 2.
Automatic STOP and START/STOP 11 ) @ The automatic mire can be used for the two ovens, dither individually or for both at the same time. if the two ovens are connected to the timer the start time and the spooking time selected apply to both and they will switch off together. in order to vse the automatic timer the cooking time and the start time have to be selected. Automatic stop newly 1. If the green line on the starting dial @ is ot visible, press the change-over button @ until the starting dial & stops.
Cleaning and maintenance Catalytic self clean main oven Secondary Oven interior lights. The main oven s coated with catalytic vitreous enamel which facilitates a self-clean process during all cooking at temperatures of 200 °C or above. A separate self clean cycle can be carried out by using a temperature of 250 °C (all accessories removed) far approximately one hour depending on the degree of collage Before cleaning switch off the oven and allow # to cool down.
Cleaning and maintenance 13 Removing the shelf supports. (i) Remove oven accessories. @ Loosen both nuts at the rear on the left and right of the oven. (@ Unscrew both nuts at the front on the left and right of the oven. @ Remove the shelf supports. Re-assemble in reverse order, Loving the Open the door and lift it off vertically. door of the To replace the door soot it on o the secondary oven dapper hinges see snows in the illustrations.
important facts on installation E MAINS CONNECTIONS Electrical connection of the oven This is a job for a qualified and approved electrician, The appliance is rated for 240 vats single phase AG amid must be permanently connected. All instructions given by the Electricity Board must be followed carefully when connecting the oven 1o the mains supply. Installation Make sure that the plastic laminate or the furniture veneer are processed with'a feat-resistant glue (heat-resistant up to 350 °C).
What to coif .. {something does not work) 15 ‘What can be wrong the Hack whether the operating sequence mfl has been fully carried out. Hack whether e the fuses in the ruse box &re in good ok working order. cone Change the bulb {40 Walt, heat-resistant from the oven roof by muting it anti I“ 10 300 °C), Before you start, disconnect clockwise. Remove the faulty lamp and koo v the fuses in the fuse box. Then release replace it by & new one.