User manual

WARNING!
Make sure that the glasses
are inserted in the correct
position otherwise the
surface of the door may
overheat.
11.6 Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1.
Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The top lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Remove the metal ring and clean the
glass cover.
3. Replace the lamp with a halogen, 230
V, 40 W, 300 °C heat resistant lamp.
4. Attach the metal ring to the glass
cover.
5. Install the glass cover.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
Problem Possible cause Remedy
You cannot activate or oper-
ate the oven.
The oven is not connected
to an electrical supply or it is
connected incorrectly.
Check if the oven is correctly
connected to the electrical
supply (refer to the connec-
tion diagram if available).
The appliance does not heat
up.
The appliance is deactiva-
ted.
Activate the appliance.
The appliance does not heat
up.
The clock is not set. Set the clock.
The appliance does not heat
up.
The necessary settings are
not set.
Make sure that the settings
are correct.
The appliance does not heat
up.
The automatic switch-off is
activated.
Refer to "Automatic switch-
off".
The appliance does not heat
up.
The Child Lock is on. Refer to "Using the Child
Lock".
The appliance does not heat
up.
The door is not closed cor-
rectly.
Fully close the door.
ENGLISH 17