User manual

Cleaning the water drawer and the
steam generator:
1.
Put the water and vinegar mixture
(approximately 250 ml) through the
water drawer into the steam gener-
ator. Wait for approximately 10 mi-
nutes.
2.
Remove the water and vinegar with
the sponge.
3.
Put clean water (100 - 200 ml) into
the water drawer to flush the steam
generation system.
4.
Remove the water from the steam
generator with the sponge and rub it
dry.
5.
Keep the door open to let the appli-
ance dry fully.
11.3 Shelf support
You can remove the shelf support to
clean the side walls.
Removing the shelf support
1.
Carefully pull the support up and out
of the front catch.
2.
Lightly move the support on the
front catch inwards.
3.
Pull the support out of the rear
catch.
Installing the shelf support
To install the shelf support follow the
procedure in the opposite order.
18
www.aeg.com