User manual

Problem Possible cause Remedy
The appliance does not
heat up.
The appliance is not acti-
vated.
Activate the appliance.
Refer to the chapter
"Daily use".
The appliance does not
heat up.
The clock is not set. Set the clock. Refer to
"Setting the clock".
The appliance does not
heat up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
The appliance does not
heat up.
The fuse in the fuse box
is released.
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
The lamp does not oper-
ate.
The lamp is defective. Replace the lamp.
The pyrolitic cleaning
does not start. The dis-
play shows C3.
The door is not fully
closed or the door lock is
defective.
Fully close the door.
The display shows F102. The door is not fully
closed or the door lock is
defective.
1.
Fully close the door.
2.
Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse
box and activate it
again.
3.
If the display shows
F102 again, contact
the service centre.
The display shows an er-
ror code that is not on
this list.
There is an electronic
fault.
1.
Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse
box and activate it
again.
2.
If the display shows
the error code again,
contact the service
centre.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavi-
ty.
We recommend that you write the data here:
Model (Mod.) .........................................
Product number (PNC) .........................................
Serial number (Serie:) .........................................
28
www.aeg.com