User manual

Button Function Description
,
MINUS, PLUS To set a value for time
MINUTE MINDER To set the minute minder. To switch
ON / OFF light in oven cavity, hold
button more than 3 seconds
TEMPERATURE To check temperature inside the
oven cavity. To check the Core Tem-
perature Sensor temperature, when
is connected (if applicable). Use only
when the oven function is set.
5.6 Heat-up / Residual heat
indicator
If you activate an oven function, the bars
in the display
come on one by one.
The bars show that the oven tempera-
ture increases or decrease.
6. CLOCK FUNCTIONS
SYM-
BOL
FUNCTION DESCRIPTION
MINUTE MINDER Use to set a countdown time. This function has
no effect on the operation of the appliance.
TIME OF DAY To set, change or control the time of day. Refer
to 'Setting the time of day'.
DURATION Use only when the oven function is set to set how
long the appliance operates.
END Use only when the oven function is set to set
when the appliance stops. You can use Duration
and End at the same time (Time delay), if the ap-
pliance is to be activate and deactivate automati-
cally later.
Press again and again to
switch between the clock func-
tions.
To confirm settings of the clock
functions use
or wait 5 sec-
onds for an automatic confirma-
tion.
6.1 Setting the DURATION or
END
1.
Press again and again until the
display shows
or .
or flashes in the display.
2.
Press or to set minutes.
3.
Press to confirm.
4.
Press or to set the necessary
hour.
5.
Press to confirm.
A sound operates after the time
ends for 2 minutes.
or sym-
bol and time setting flash in the dis-
play. The appliance stops.
6.
Press any button to stop the sound.
10
www.aeg.com