User manual

10. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a
cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
• Clean all oven accessories after each
use and let them dry.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause a damage to the
nonstick coating.
10.1 Pyrolytic cleaning
1.
Remove the removable shelf sup-
ports and accessories from the ap-
pliance.
The pyrolytic cleaning proce-
dure cannot start:
– If you do not remove the shelf
supports. The display shows "C1".
– If you do not close the appliance
door correctly. The display shows
"C3".
2.
Remove the worst dirt manually.
3.
Clean the inner side of the door with
hot water, so that the residues do
not burn from the hot air.
4.
Set the Pyrolytic cleaning function.
Refer to "Oven functions".
5.
When flashes, press or to
set the necessary procedure:
– P1 – 1 h 30 min for low level of
dirt.
– P2 – 2 h 30 min for usual level of
dirt.
The procedure starts after 2 sec-
onds.
Useful information
• To change the length of the set proce-
dure (P1 or P2), press
until
flashes. Press or to set the dura-
tion.
• You can use the End function to delay
the start of the cleaning process.
• When the appliance is at the set tem-
perature, the door locks. The symbol
and the bars of the heat indicator
come up, until the door unlocks again.
• During the pyrolytic cleaning the lamp
is off.
Cleaning reminder
To remind you that the pyrolytic clean-
ing is necessary the cleaning reminder
symbol PYR flashes in the display for the
next 10 seconds after you activate or de-
activate the appliance.
Clean the inner side of the door with hot
water to avoid any residue burning in
because of hot air.
Clean the inner side of the door with hot
water, so that the residues do not burn
from the hot air.
The cleaning reminder goes
out:
• After end of the Pyro cleaning func-
tion.
•
If you press
and at the same
time while PYR flashes in the display.
ENGLISH 25