User manual

10.2 Shelf supports
Removing the shelf supports
You can remove the shelf supports to
clean the side walls.
1.
Pull the front of the shelf support
away from the side wall.
1
2
2.
Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
10.3 Removing / inserting the
door
WARNING!
Be careful when you remove the
door from the appliance. The
door is heavy.
You can remove the door and the inter-
nal glass panels to clean it. The number
of glass panels is different for different
models.
A
A
Removing the door and the glass pan-
els
1.
Open the door fully.
2.
Fully press the clamping levers (A)
on the two door hinges.
3.
Close the door to the first opening
position (approximately 70° angle).
4.
Hold the door with one hand on
each side and pull it away from the
appliance at an up angle.
5.
Put the door with the outer side
down on a soft cloth on a stable sur-
face. This is to prevent scratches.
26
www.aeg.com