User manual

• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
4.2 Setting the time of day
After first connection to the mains all
symbols in the display are on for some
seconds. For the subsequent few sec-
onds the display shows software version.
After the software version goes off, the
display shows
and "12:00". "12"
flashes.
1.
Press or to set current hour.
2.
Press to confirm (necessary only
for the first setting, later new time
will be saved automatically after 5
seconds).
The display shows
and set
hour. "00" flashes.
3.
Press or to set current mi-
nutes.
4.
Press to confirm (necessary only
for the first setting, later new time
will be saved automatically after 5
seconds) .
The Temperature / Time display
shows new time.
Changing the time of day
You can change the time of day only if
the appliance is deactivated.
Press
. The set time and symbol
flash in the display. To set new time use
the procedure "Setting the time of day".
5. DAILY USE
WARNING!
Refer to the Safety chapters.
To use the appliance, press the control
knob. The control knob comes out.
5.1 Activating and
deactivating the appliance
1.
Turn the oven functions control knob
to select an oven function.
2.
Turn the temperature control knob
/ to set a temperature.
3.
To deactivate the appliance turn the
oven functions control knob to off
position ("0") .
Knob symbol, indicator or lamp
(depends on the model - refer
to the appliance overview):
• The indicator comes on when the
oven heats up.
• The lamp comes on when the appli-
ance operates.
• The symbol shows whether the knob
controls one of the cooking zones, the
oven functions or the temperature.
5.2 Oven Functions
Oven function Application
Fast Heat Up To decrease the heat-up time.
True Fan Cooking To bake on up to 3 oven levels at the same
time and to dry food. Set the oven tempera-
tures 20 - 40 °C lower than when using Con-
ventional Cooking.
8
www.aeg.com