EN User Manual Steam oven BOGES
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 7 4. CONTROL PANEL...........................................................................................................8 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • • • • Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Do not use a steam cleaner to clean the appliance. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
ENGLISH • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. • If the mains socket is loose, do not connect the mains plug. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
www.aeg.com – Be careful when you open the appliance door when the function is activated. Steam can release. – Open the appliance door with care after the steam cooking operation. 2.5 Care and cleaning WARNING! Risk of injury, fire, or damage to the appliance. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Make sure the appliance is cold. There is the risk that the glass panels can break.
ENGLISH 3. PRODUCT DESCRIPTION 3.1 General overview 1 2 3 4 5 6 5 4 10 3 7 2 1 8 9 3.2 Accessories Wire shelf For cookware, cake tins, roasts. Baking tray 1 2 3 4 5 6 7 8 9 10 Control panel Electronic programmer Water drawer Socket for the core temperature sensor Heating element Lamp Fan Steam generator with cover Shelf support, removable Shelf positions To bake and roast or as a pan to collect fat. Core temperature sensor To measure how far the food is cooked.
www.aeg.com 4. CONTROL PANEL 4.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field 1 2 3 4 - Function Description DISPLAY Shows the current settings of the appliance. ON / OFF To activate and deactivate the appliance. OPTIONS To set an oven function or an automatic programme. MY FAVOURITE PROGRAMME To store your favourite programme.
ENGLISH Sensor Field 10 Function Description MINUTE MINDER To set the Minute Minder. 9 4.2 Display A B G C F E D A) Oven function symbol B) Temperature / time of day display C) Clock / Residual heat display / Minute Minder D) Residual heat indicator E) Indicators for the clock functions F) Heat-up indicator / Fast Heat Up indicator G) Number of an oven function / programme Other indicators of the display: Symbol / / Name Description Functions You can choose an oven function.
www.aeg.com 5. BEFORE FIRST USE After the software version goes off, the display shows h and 12:00. WARNING! Refer to Safety chapters. 5.1 Initial Cleaning Remove all accessories and removable shelf supports from the appliance. Refer to "Care and cleaning" chapter. Clean the appliance before first use. Put the accessories and the removable shelf supports back to their initial position. 1. Touch or 2. Touch or 3.
ENGLISH Oven function 11 Application Moist Fan Baking To save energy when you bake and cook dry baked goods. Also to bake baked goods in tins on 1 shelf position. True Fan Cooking To bake on up to 3 shelf positions at the same time and to dry food. Set the temperature 20 - 40 °C lower than for Conventional Cooking. Pizza Setting To bake food on 1 shelf position for a more intensive browning and a crispy bottom. Set the temperature 20 - 40 °C lower than for Conventional Cooking.
www.aeg.com 2. Touch or function. to set an oven 3. Touch or the appliance starts automatically after five seconds. If you activate the appliance and do not set an oven function or programme, the appliance deactivates automatically after 20 seconds. 6.4 Changing the temperature Touch or to change the temperature in steps of 5 °C. When the appliance is at the set temperature, an acoustic signal sounds three times and the Heat up indicator goes out. 6.
ENGLISH 13 7. CLOCK FUNCTIONS 7.1 Clock functions table Clock function Application COUNT UP TIMER To set the count up, which shows how long the appliance operates. This function has no effect on the operation of the appliance. TIME OF DAY To show the time of day. To change the time of day, refer to "Setting the time". DURATION To set how long the appliance operates. END To set when the appliance deactivates.
www.aeg.com and the time setting flash in the display. The appliance deactivates. 4. Touch a sensor field or open the oven door to stop the acoustic signal. 5. Deactivate the appliance. 7.5 Setting the SET+GO You can use the SET+GO function only when the DURATION is set. 1. Set an oven function (or a programme) and temperature (refer to "Setting the oven function" and "Changing the temperature"). 2. Set the DURATION (refer to "Setting the DURATION"). 3.
ENGLISH 8.2 Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Activate the appliance. 2. Touch . or to set the weight 3. Touch programme. Refer to the "Recipe book". The display shows: the cooking time, the duration symbol , a default weight, a unit of measurement (kg, g). or the settings save 4. Touch automatically after five seconds. The appliance activates. 5. You can change the default weight or . Touch . value with 6.
www.aeg.com The core temperature sensor must stay in the meat and in the socket during the cooking. 1. Activate the appliance. 2. Put the point of the core temperature sensor (with on the handle) into the centre of the meat. 3. Put the plug of the core temperature sensor into the socket at the front of the appliance. The display shows the current core temperature and the heat up symbol . While the appliance calculates the approximate duration time, the display shows the count up time.
ENGLISH 9.2 Inserting the accessories CAUTION! Do not use the baking tray or deep pan with the Full Steam function. Wire shelf and baking tray together: Push the baking tray between the guide bars of the shelf support and the wire shelf on the guide bars above. Wire shelf: Push the shelf between the guide bars of the shelf support and make sure that the feet point down.
www.aeg.com 10. ADDITIONAL FUNCTIONS 10.1 Using My Favourite Programme function SAFE comes on in the display. To deactivate the Child Lock function repeat step 2. Use this function to save your favourite temperature and time settings for an oven function or programme. 10.3 Using the Function Lock You can activate the function only when the appliance operates. 1. Set the temperature and time for an oven function or programme. The Function Lock prevents an accidental change of the oven function. 2.
ENGLISH 7 Description Value to set RESTORE SETTINGS ON / OFF 19 1) It is not possible to deactivate the tone of the ON / OFF sensor field. 1. When the appliance is deactivated, 10.6 Brightness of the display touch and hold for three seconds. The display shows SET1 and "1" flashes. There are two modes of display brightness: 2. Touch or 3. Touch . to set the setting. Temperature (°C) Switch-off time (h) 30 - 115 12.
www.aeg.com 11.2 Removing the shelf supports Keep the door open for approximately 1 hour to let the appliance dry fully. Before maintenance, make sure that the appliance is cool. There is a risk of burns. 11.4 Steam generation system To clean the appliance, remove the shelf supports. 1. Pull carefully the supports up and out of the front catch. 1 3 2 2. Pull the front end of the shelf support away from the side wall. 3. Pull the supports out of the rear catch.
ENGLISH 21 1. Deactivate the appliance. 2. Remove the fuses from the fuse box or deactivate the circuit breaker. A The top lamp A 1. Turn the lamp glass cover counterclockwise to remove it. 3. Close the door until it is at an angle of approximately 45°. 45° 2. Remove the metal ring and clean the glass cover. 3. Replace the lamp with a halogen, 230 V, 40 W, 300 °C heat resistant lamp. 4. Attach the metal ring to the glass cover. 5. Install the glass cover. The side lamp 4.
www.aeg.com 12.1 What to do if... Problem Possible cause Remedy The oven does not heat up. The oven is deactivated. Activate the oven. The oven does not heat up. The clock is not set. Set the clock. The oven does not heat up. The necessary settings are not set. Make sure that the settings are correct. The oven does not heat up. The automatic switch-off is activated. Refer to "Automatic switchoff". The oven does not heat up. The Child Lock is on. Refer to "Using the Child Lock".
ENGLISH 23 Problem Possible cause Remedy The appliance is activated and does not heat up. The fan does not operate. The display shows "Demo". The demo mode is activated. 1. Deactivate the oven. 2. Touch and hold until the oven activates and deactivates. 3. Touch and hold and at the same time until an acoustic signal sounds and "Demo" goes out. 12.2 Service data If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre.
www.aeg.com min. 3 mm 13.2 Building in During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess. A = appliance, N = recess B 180 mm A A ~50 mm A A 595 N mm 585-592 mm 442 mm 115 mm 20 mm N min.
ENGLISH B A ~50 mm A N 600 mm A 595 mm 180 mm 115 mm 1. Do the electrical connections as in the connection illustration. Phase definitions: L1, L2 (or R, S). Voltage: 400V N min. 550 mm A 567 mm 20 mm electrical connection that is accessible and outside the coordination room. The length of the connection cable must be approximately 120 cm with lines connected directly to the mains. Only a qualified person can connect the appliance to the electricity supply.
www.aeg.com 1 = 45 mm 2 = 45 mm 3 = 60 mm 4 = 60 mm = 70 mm 1 3 2 3 4 4 14. ENERGY EFFICIENCY 14.1 Product Fiche and information according to EU 65-66/2014 Supplier's name AEG Model identification BOGESM Energy Efficiency Index 106.0 Energy efficiency class A Energy consumption with a standard load, conventional mode 1.09 kWh/cycle Energy consumption with a standard load, fan-forced 0.
ENGLISH – Make sure that the oven door is closed properly when the appliance operates and keep it closed as much as possible during the cooking. – Use metal dishes to improve the energy saving. – When possible, put the food inside the oven without heating it up. – When the cooking duration is longer than 30 minutes, reduce the oven temperature to minimum, 3 - 10 minutes before 15. CH 27 the end of the cooking time, depending on the duration of the cooking.
www.aeg.com your local recycling facility or contact your municipal office. For Switzerland: Where should you take your old equipment? Anywhere that sells new equipment or hand it in to official SENS collection points or official SENS recycling firms. The list of official SENS collection points can be found at www.erecycling.
ENGLISH 29
www.aeg.
ENGLISH 31
867316114-A-412014 www.aeg.