User manual

Sym-
bol
Function Description
Duration To set how long the appliance must operate. First set
an oven function before you set this function.
End To set when the appliance must be deactivated. First
set an oven function before you set this function. You
can use Duration and End at the same time (Time De-
lay) to set the time when the appliance must be activa-
ted and then deactivated.
Press again and again to
change the clock function.
Press to confirm the settings
of the clock functions, or wait 5
seconds for the setting to be
confirmed automatically.
6.1 Setting the Duration or
End function
1.
Press again and again until the
symbol
or flashes in the dis-
play.
2.
Press + or - to set the minutes.
3.
Press to confirm.
4.
Press + or - to set the hour.
5.
Press to confirm.
6.
When the set time ends, the symbol
or and the set time flash. The
acoustic signal sounds for two mi-
nutes. The appliance deactivates.
Press a button or open the appli-
ance door to stop the signal.
If you press while setting the
time for Duration
, the appli-
ance switches to setting the End
function.
6.2 Setting the Minute Minder
Used to set a countdown time. The max-
imum time you can set is 23 hours 59 mi-
nutes. This function has no effect on the
operation of the oven. You can set the
Minute Minder at any time, also if the
appliance is off.
1.
Press again and again until
and 00 flash in the display.
2.
Press + or - to set the Minute Mind-
er. At first the time is calculated in
minutes and seconds. When the
time you set is longer than 60 mi-
nutes, the symbol
comes on in
the display. The appliance then cal-
culates the time in hours and mi-
nutes.
3.
The Minute Minder starts automati-
cally after five seconds.
4.
When the set time ends, the acous-
tic signal sounds for two minutes.
00:00 and
flash in the display.
Press a button to stop the signal.
If you set the Minute Minder
when the Duration
or End
function operates, the symbol
comes on in the display.
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
ately when the oven starts to heat.
To reset the Count Up Timer, press and
hold + and -. The timer starts to count
up again.
You cannot use the Count Up
Timer when the Duration
or
End
function operates.
7. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
10
www.aeg.com