User manual

ManualsBrandsAEG ManualsDomestic AppliancesBP3203121M

Button Function Description

CLOCK To set a clock function.

PLUS To set the time.

5.6 Heat-up indicator

When you activate an oven function, the

bars in the display come on one by

one. The bars show that the oven

temperature increases or decreases.

6. CLOCK FUNCTIONS

6.1 Clock functions table

Clock function Application

TIME OF DAY To set, change or check the time of day. Refer to "Set-

ting the time".

MINUTE MINDER Use to set a countdown time (maximum 23 h 59 min).

This function has no effect on the operation of the ap-

pliance. You can set the MINUTE MINDER at any time,

also if the appliance is off.

DURATION To set how long the appliance operates. Use only when

an oven function is set.

END To set when the appliance must deactivate. Use only

when an oven function is set. You can use Duration and

End at the same time (time delay), if the appliance is to

be activate and deactivate automatically later.

Press again and again to

switch between the clock

functions.

To confirm the settings of

the clock functions, press

or wait 5 seconds for an

automatic confirmation.

6.2 Setting the DURATION or

END

1. Press again and again until the

display shows

or .

or flashes in the display.

2. Press

or to the set the values

and press to confirm.

For Duration first you set the minutes

and then the hours, for End first you

set the hours and then the minutes.

An acoustic signal sounds for 2 minutes

after the time ends. or symbol

and time setting flash in the display. The

oven stops.

3. Turn the knob for the oven functions

to the off position.

4. Press any button or open the oven

door to stop the acoustic signal.

If you press when you set

the hours for DURATION

, the appliance goes to

setting of the END

function.