User manual

90°
9.
Turn the two fasteners by 90° and
remove them from their seats.
1
2
10.
Carefully lift (step 1) and remove
(step 2) the glass panels one by one.
Start from the top panel.
11.
Clean the glass panels with water
and soap. Dry the glass panels care-
fully.
Installing the door and the glass panels
AB C
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
(A, B and C) back in the correct se-
quence. The middle panel (B) has a dec-
orative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on
the screen-printing zones is not rough
when you touch it.
Make sure that you install the top panel
in the seats correctly.
ENGLISH 23