User manual

Problem Possible cause Solution

The display shows C2 You want to start the pyrolytic

cleaning or defrost function

but you did not remove food

sensor plug from the socket.

Remove the food sensor plug

from the socket

The display shows F2 • The door is not closed cor-

rectly

• The door lock is defect

• Close the door correctly

• Switch off the appliance

with the house fuse or the

safety switch in the fuse box

and switch it on again

• If the display shows F2 again,

refer to the Customer Care

Department

The display shows an error code

that is not in this list

There is an electronic fault • Switch off the appliance

with the house fuse or the

safety switch in the fuse box

and switch it on again

• If the display shows the error

code again, refer to the Cus-

tomer Care Department

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the oven cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

INSTALLATION

WARNING!

Refer to "Safety information" chapter.

The built-in unit must meet the stability requirements of DIN 68930.

Installation