User manual

Oven function Application
13 Pyro Cleaning For automatic pyrolytic cleaning of the oven.
The oven temperature is at approximately 500
°C. It burns off residual dirt in the oven. This can
then be removed with a cloth when the oven is
cold.
6.1 Setting the oven function
1.
Activate the appliance with or
. The display shows the set tempera-
ture, the symbol and the number of
the oven function.
2.
Touch or to set an oven
function.
3.
Touch or the appliance starts
automatically after five seconds.
If you activate the appliance and
do not set an oven function or
programme, the appliance deac-
tivates automatically after 20 sec-
onds.
6.2 Changing the temperature
Touch / to change the tempera-
ture in steps of 5 °C.
When the appliance is at the set temper-
ature, an acoustic signal sounds three
times and the Heat up indicator goes
out.
6.3 Checking the temperature
You can see the temperature in the ap-
pliance when the function or programme
operates.
1.
Touch . The Temperature / Time
display shows the temperature in the
appliance. If you want to change the
oven temperature, touch
one
more time and use
or .
2.
Touch to go back to the set
temperature or the display shows it
automatically after five seconds.
6.4 Fast heat up function
The Fast heat up function decreases the
heat up time.
Activating the Fast heat up function:
Touch and hold
for more than three
seconds.
If you activate the Fast heat up function,
the bars on the display
flash one by
one and
comes on to show that
the function operates.
Additional information:
• Do not put food into the oven when
the Fast heat up function operates.
• The Fast heat up is not available with
all oven functions. An acoustic signal
sounds if the Fast heat up is not avail-
able for the set function.
6.5 Energy saving
The appliance contains features
which help you save energy
during everyday cooking:
• Residual heat:
– When the heating function
or programme operates, the
heating elements are deacti-
vated 10% earlier (the lamp
and fan continue to oper-
ate). For this feature to oper-
ate, the cooking time must
be longer than 30 minutes or
you must use the clock func-
tions (Duration, End, Time
delay). This feature does not
operate with the grill func-
tions.
– When the appliance is off,
you can use the heat to keep
food warm. The clock / re-
sidual heat display shows
the remaining temperature,
and the bars show the tem-
perature as it decreases.
• Cooking with the lamp off -
Touch
to deactivate the
lamp during cooking.
• Deactivating the display - If
necessary, you can fully deacti-
vate the appliance. Touch
and at the same time until
the display goes out. This step
also activates the appliance.
12
www.aeg.com