User manual

•
With Duration
and End
Time
you must set the
heating function and the tem-
perature first. Then you can set
the clock function. The appli-
ance deactivates automatically.
•
You can use Duration
and
End Time
at the same
time if you want to automati-
cally activate and deactivate
the appliance at a given time
later.
• When you use the Core tem-
perature sensor (if applicable),
the Duration
and End
Time
functions do not op-
erate.
7.2 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate
the function in the Basic Set-
tings menu.
• Conditions for the function:
– The set temperature is more
than 80 °C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function operates for
30 minutes.
The Heat + Hold function stays on if you
change the heating functions.
7.3 Extra Time
The Extra Time function makes the heat-
ing function continue after the Duration
ends.
• Applicable for all heating functions
with Duration or Weight Automatic.
• Not applicable for heating functions
with CT Sensor .
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press to activate (or to can-
cel).
4.
Set the length of the Extra Time .
Press OK to confirm.
8. AUTOMATIC PROGRAMMES
8.1 Automatic programmes
These 3 automatic programmes give op-
timum settings for each type of meat or
other recipes:
• Meat programmes with Weight Auto-
matic ( Assisted Cooking menu) —
This function automatically calculates
the roasting time. To use it you need
to input food weight.
• Meat programmes with CT Sensor Au-
tomatic ( Assisted Cooking menu) —
This function automatically calculates
the roasting time. To use it you need
to input core temperature. When the
programme ends an acoustic signal
sounds.
• Recipe Automatic ( Assisted Cooking
menu) — This function uses prede-
fined values for a dish. Prepare the
dish according to recipe from this
book.
Weight Automatic dishes
Roast Pork
Roast Veal
Braised Meat
14
www.aeg.com