User manual

Activating the Function Lock :
1.
Activate the appliance.
2.
Set a heating function or setting.
3.
Press again and again until the
display shows Function Lock.
4.
Press OK to confirm.
If the appliance has the Pyrolytic
cleaning function and the func-
tion operates, the door is locked
and the symbol of a key comes
on in the display.
Deactivating the Function Lock :
1.
Press . The display shows a mes-
sage.
2.
Press and then OK to confirm.
10.3 Child Lock
The Child Lock prevents an accidental
operation of the appliance .
Activating and deactivating the Child
Lock function:
1.
Activate the appliance.
2.
Touch and at the same time
until the display shows a message.
If the appliance has the Pyrolytic
cleaning function, the door is
locked and the symbol of a key
comes on in the display.
A message comes on in the dis-
play when you touch a sensor
field.
To unlock the appliance, touch
and
at the same time again until the dis-
play shows a message.
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and
use it later with one press of the sensor
field.
Activating the function:
1.
Activate the appliance.
2.
Set the heating function.
3.
Press again and again until the
display shows Duration .
4.
Set the time.
5.
Press again and again until the
display shows SET + GO .
6.
Press OK to confirm.
To start SET + GO , press any sensor
field (except for
). The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
Useful information:
• When the heating function operates,
the Function Lock is on.
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
• If an oven function operates.
• If you do not change the oven temper-
ature.
Oven tempera-
ture
Switch-off time
30 °C - 115 °C 12.5 h
120 °C - 195 °C 8.5 h
200 °C - 245 °C 5.5 h
250 °C - maxi-
mum °C
3.0 h
The automatic switch-off works
with all functions, except Light ,
Duration , End Time and Core
Temperature Sensor.
10.6 Cooling fan
When the appliance operates, the cool-
ing fan activates automatically to keep
the surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
continues to operate until the tempera-
ture in the appliance cools down.
10.7 Safety thermostat
Incorrect operation of the appliance or
defective components can cause dan-
gerous overheating. To prevent this, the
oven has a safety thermostat which inter-
rupts the power supply. The oven acti-
18
www.aeg.com