Operation Manual

ManualsBrandsAEG Manualsindustrial & lab equipmentBP8715101M

7. CLOCK FUNCTIONS

7.1 Clock functions table

Clock function Application

Minute Minder To set a countdown (max. 2 h 30 min). This

function has no effect on the operation of the

appliance. You can also activate it when the

appliance is deactivated.

Use to activate the function. Press or

to set the minutes and to start.

Duration To set the length of an operation (max. 23 h

59 min).

End Time To set the switch-off time for a heating func-

tion (max. 23 h 59 min).

If you set the time for a clock function,

the time starts to count down after 5

seconds.

If you use the clock

functions: Duration, End

Time, the appliance

deactivates the heating

elements after 90 % of the

set time. The appliance uses

the residual heat to continue

the cooking process until the

time ends (3 - 20 minutes).

7.2 Setting the clock functions

• Before you use the

functions: Duration, End

Time, you must set a

heating function and

temperature first. The

appliance deactivates

automatically.

• You can use the

functions: Duration and

End Time at the same

time if you want to

automatically activate

and deactivate the

appliance on a given time

later.

• The functions: Duration

and End Time do not

work when you use the

core temperature sensor.

1. Set a heating function.

2. Press again and again until the

display shows the necessary clock

function and the related symbol.

3. Press or to set the necessary

time.

4. Press

to confirm.

When the time ends, an acoustic signal

sounds. The appliance deactivates. The

display shows a message.

5. Press any symbol to stop the signal.