User manual

7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock func-
tion
Application
TIME OF DAY
To show or change the
time of day. You can
change the time of day
only when the oven is off.
DURATION
To set how long the oven
works. Use only when a
heating function is set.
END
To set when the oven
turns off. Use only when a
heating function is set.
TIME DELAY
Combination of DURA-
TION and END function.
MINUTE
MINDER
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
00:00
COUNT UP
TIMER
If you do not set any oth-
er clock function the
COUNT UP TIMER auto-
matically monitor how
long the oven works.
It is on immediately when
the oven starts to heat.
The Count Up Timer can-
not be used with the
functions: DURATION,
END.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
and
"12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and set the
minutes.
The display shows and the set
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
flashes in the display.
7.3 Setting the DURATION
function
1. Set a heating function.
2. Press again and again until
starts to flash.
3. Press
or to set the minutes and
then the hours. Press to confirm.
When the set Duration time ends the
signal sounds for 2 minutes. and time
setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
7.4 Setting the END function
1. Set a heating function.
2. Press again and again until
starts to flash.
3. Press
or to set the hours and
then the minutes. Press to
confirm.
At the set End time the signal sounds for
2 minutes.
and time setting flash in
the display. The oven turns off
automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
www.aeg.com
10