BPB351020M USER MANUAL FR Notice d'utilisation Four
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................2 2. CONSIGNES DE SÉCURITÉ........................................................................................4 3. DESCRIPTION DE L'APPAREIL...................................................................................8 4. AVANT LA PREMIÈRE UTILISATION......................................................................... 8 5. UTILISATION QUOTIDIENNE......
FRANÇAIS 3 pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • Utilisez toujours des gants de cuisine pour retirer ou enfourner des accessoires ou des plats allant au four. Avant toute opération de maintenance, déconnectez l'alimentation électrique. Assurez-vous que l'appareil est éteint et débranché avant de remplacer l'éclairage afin d'éviter tout risque de choc électrique. N'utilisez pas de nettoyeur vapeur pour nettoyer l'appareil.
FRANÇAIS • L'ensemble des branchements électriques doit être effectué par un technicien qualifié. • L'appareil doit être relié à la terre. • Vérifiez que les données électriques figurant sur la plaque signalétique correspondent à celles de votre réseau. Si ce n'est pas le cas, contactez un électricien. • Utilisez toujours une prise de courant de sécurité correctement installée. • N'utilisez pas d'adaptateurs multiprises ni de rallonges.
www.aeg.com • • • • • – ne placez jamais de feuilles d'aluminium directement sur le fond de l'appareil. – ne versez jamais d'eau directement dans l'appareil lorsqu'il est chaud. – une fois la cuisson terminée, ne laissez jamais d'aliments ou de plats humides à l'intérieur de l'appareil. – faites attention lorsque vous retirez ou remettez en place les accessoires. La décoloration de l'émail ou de l'acier inoxydable est sans effet sur les performances de l'appareil.
FRANÇAIS • • • • matériaux dont est fait le four. Par conséquent, nous recommandons à nos clients de suivre les conseils cidessous : – assurez-vous que la ventilation de l'appareil est adéquate pendant et après chaque phase de nettoyage par pyrolyse. – assurez-vous que la ventilation de l'appareil est adéquate pendant et après la première utilisation à température maximale.
www.aeg.com 3. DESCRIPTION DE L'APPAREIL 3.1 Vue d'ensemble 1 13 2 3 4 5 4 3 2 1 5 6 7 8 9 10 11 12 3.
FRANÇAIS 9 5. UTILISATION QUOTIDIENNE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 5.1 Manettes rétractables Pour utiliser l'appareil, appuyez sur la manette de commande. La manette de commande sort de son logement. 1. Tournez la manette des fonctions du four pour sélectionner une fonction. 2. Tournez la manette du thermostat pour sélectionner la température souhaitée. 3. Pour éteindre l'appareil, tournez les manettes des fonctions du four et celle de température en position ARRET.
www.aeg.com Fonction du four Utilisation Sole Pulsée Pour cuire des aliments sur un seul niveau et leur donner un brunissement plus intense et une pâte bien croustillante. Diminuez les températures de 20 à 40 °C par rapport à la Convection naturelle. Voûte Pour cuire et rôtir des aliments sur un seul niveau. Sole Pour cuire des gâteaux à fond croustillant et pour stériliser des aliments.
FRANÇAIS Reportez-vous au chapitre « Conseils ». 1. Ouvrez la porte du four. 2. Remplissez le bac de la cavité avec de l'eau du robinet. Le bac de la cavité a une contenance maximale de 250 ml. Remplissez le bac de la cavité d'eau uniquement lorsque le four est froid. 3. Placez les aliments dans le four et fermez la porte. 4. Sélectionnez la fonction Chaleur tournante PLUS : . 5. Appuyez sur la touche Vapeur Plus . La touche Vapeur plus fonctionne uniquement avec la fonction Chaleur tournante PLUS.
www.aeg.com 5.7 Indicateur de chauffe Les barres indiquent l'augmentation ou la diminution de la température du four. Lorsque vous activez une fonction du four, les segments s'affichent un à un . 6. FONCTIONS DE L'HORLOGE 6.1 Tableau des fonctions de l'horloge Fonction de l'horloge 00:00 Utilisation HEURE Pour afficher ou modifier l'heure. Vous ne pouvez régler l'heure que lorsque l'appareil est éteint. DURÉE Pour régler la durée de fonctionnement de l'appareil.
FRANÇAIS Quand le temps programmé se termine, un signal sonore retentit pendant 2 minutes. et le réglage de la durée clignotent. L'appareil se met à l'arrêt automatiquement. 5. Appuyez sur une touche pour arrêter le signal sonore. 6. Tournez la manette des fonctions du four sur la position Arrêt. 6.4 Réglage de la FIN 1. Régler une fonction du four. 2. Appuyez sur jusqu'à ce que clignoter. à plusieurs reprises commence à ou pour régler les 3. Utilisez heures et les minutes de l'heure de FIN.
www.aeg.com Poussez la grille entre les barres de guidage des supports de grille et assurez-vous que les pieds sont orientés vers le bas. Grille métallique et plat à rôtir ensemble : Poussez le plat à rôtir entre les rails du support de grille et glissez la grille métallique entre les rails se trouvant juste au-dessus et assurez-vous que les pieds pointent vers le bas. Plat à rôtir : Poussez le plat à rôtir entre les rails du support de grille choisi.
FRANÇAIS 1. Sélectionnez une fonction du four et réglez-la selon vos préférences 2. Appuyez simultanément sur les touches et et maintenez-les enfoncées pendant au moins 2 secondes. Un signal sonore retentit. Loc s'affiche. Pour désactiver la fonction Touches Verrouil., répétez l'étape 2. Si la fonction Pyrolyse est en cours, la porte est verrouillée et s'affiche. Loc s'allume sur l'affichage lorsque vous tournez la manette du thermostat ou que vous appuyez sur une touche.
www.aeg.com 9.1 Intérieur de la porte 9.2 Chaleur tournante PLUS Sur certains modèles, vous trouverez à l'intérieur de la porte du four : • les numéros des niveaux d'enfournement. • des informations sur les fonctions du four, les niveaux d'enfournement et les températures recommandés pour des plats spécifiques. Avant le préchauffage et uniquement lorsque le four est froid, remplissez le bac de la cavité d'eau. Reportez-vous au chapitre « Activation de la fonction Chaleur tournante PLUS ».
FRANÇAIS 17 Plat Eau dans le bac de la cavité (ml) Température (°C) Durée (min) Positions des grilles Croissants, surgelés 200 170 - 180 15 - 25 21) 1) Avant la cuisson, faites préchauffer votre four vide pendant 10 minutes.
www.aeg.com 10 minutes avant la fin du temps de cuisson, afin d'utiliser la chaleur résiduelle. Lorsque vous cuisinez des plats surgelés, les plateaux de cuisson peuvent se déformer en cours de cuisson. Une fois les plateaux refroidis, cette torsion disparaît. 9.4 Conseils de cuisson Résultats de cuisson Cause probable Solution Le dessous du gâteau n'est pas suffisamment doré. La position de la grille est in- Placez le gâteau sur un nicorrecte. veau plus bas.
FRANÇAIS 9.
www.aeg.com Plat Fonction Température (°C) Pain (pain de seigle) : 1. Première partie du processus de cuisson. 2. Deuxième partie du processus de cuisson. Voûte 1. 2.
FRANÇAIS Biscuits/Gâteaux secs Plat Fonction Température (°C) Durée (min) Positions des grilles Biscuits sablés Chaleur tournante 150 - 160 10 - 20 3 Short bread / Biscuits sablés / Tresses feuilletées Chaleur tournante 140 20 - 35 3 Short bread / Biscuits sablés / Tresses feuilletées Voûte 1601) 20 - 30 3 Biscuits à base de génoise Chaleur tournante 150 - 160 15 - 20 3 Pâtisseries à base de blancs d'œufs/Meringues Chaleur tournante 80 - 100 120 - 150 3 Macarons Chaleur tourn
www.aeg.com 9.6 Gratins Plat Fonction Température (°C) Durée (min) Positions des grilles Gratin de pâtes Voûte 180 - 200 45 - 60 1 Lasagnes Voûte 180 - 200 25 - 40 1 Gratin de légu- Turbo gril 160 - 170 15 - 30 1 Baguettes garChaleur tournies de fromage nante fondu 160 - 170 15 - 30 1 Gratins sucrés Voûte 180 - 200 40 - 60 1 Gratins de poisson Voûte 180 - 200 30 - 60 1 Légumes farcis Chaleur tournante 160 - 170 30 - 60 1 mes 1) 1) Préchauffez le four. 9.
FRANÇAIS 23 Gâteaux / pâtisseries / pains sur plateaux de cuisson Plat Température (°C) Durée (min) Choux à la crème / éclairs 160 - 1801) Crumble sec 150 - 160 Positions des grilles 2 positions 3 positions 25 - 45 1/4 - 30 - 45 1/4 - 1) Préchauffer le four.
www.aeg.com Plat Température (°C) Durée (min) Positions des grilles Tartes 180 - 200 40 - 55 1 Quiche aux épinards 160 - 180 45 - 60 1 Quiche Lorraine 170 - 190 45 - 55 1 Flan suisse 170 - 190 45 - 55 1 Gâteau au fromage 140 - 160 60 - 90 1 Tarte aux pommes, couv.
FRANÇAIS 9.11 Tableaux de rôtissage Bœuf Plat Quantité Fonction Température (°C) Durée (min) Positions des grilles Bœuf braisé 1 - 1,5 kg Convection naturelle 230 120 - 150 1 Rôti ou filet de bœuf : saignant par cm d'épaisseur Turbo gril 190 - 2001) 5-6 1 Rôti ou filet de bœuf : à point par cm d'épaisseur Turbo gril 180 - 1901) 6-8 1 Rôti ou filet de bœuf : bien cuit par cm d'épaisseur Turbo gril 170 - 1801) 8 - 10 1 1) Préchauffez le four.
www.aeg.com Gibier Plat Quantité (kg) Fonction Température Durée (min) (°C) Positions des grilles Râble/Cuisse jusqu'à 1 de lièvre Convection naturelle 2301) 30 - 40 1 Selle de chevreuil 1.5 - 2 Convection naturelle 210 - 220 35 - 40 1 Cuissot de chevreuil 1.
FRANÇAIS 27 Gril Plat Température (°C) Durée (min) 1re face 2e face Rôti de boeuf 210 - 230 30 - 40 30 - 40 2 Filet de bœuf 230 20 - 30 20 - 30 3 Échine de porc 210 - 230 30 - 40 30 - 40 2 Rôti/Filet de veau 210 - 230 30 - 40 30 - 40 2 Échine d'agneau 210 - 230 25 - 35 20 - 25 3 Poisson entier, 500 - 1 000 g 15 - 30 15 - 30 3/4 210 - 230 Positions des grilles 9.13 Plats surgelés Utilisez la fonction Chaleur tournante.
www.aeg.
FRANÇAIS • Ne mettez pas plus de six bocaux à conserves d'un litre sur le plateau de cuisson. • Remplissez les bocaux au même niveau et enclenchez le système de fermeture. • Les bocaux ne doivent pas se toucher. • Mettez environ 1/2 litre d'eau dans le plateau de cuisson pour humidifier le four. 29 • Lorsque le liquide contenu dans les pots commence à frémir (au bout d'environ 35 à 60 minutes pour des pots d'un litre), éteignez le four ou réduisez la température à 100 °C (reportez-vous au tableau).
www.aeg.
FRANÇAIS Utilisez du vinaigre à 6 % maximum, sans herbes. 2. Laissez le vinaigre dissoudre les résidus calcaires à température ambiante pendant 30 minutes 3. Nettoyez la cavité à l'eau tiède avec un chiffon doux. 10.3 Retrait des supports de grille Pour nettoyer le four, retirez les supports de grille 1. Écartez l'avant du support de grille de la paroi latérale. 2. Écartez l'arrière du support de grille de la paroi latérale et retirez le support.
www.aeg.com Vous pouvez utiliser la fonction Fin pour différer le départ de la procédure de nettoyage. Au cours du nettoyage par pyrolyse, l'éclairage du four est éteint. 5. Pour modifier la durée par défaut de la procédure (P1 ou P2), appuyez sur pour régler 1. Ouvrez complètement la porte. 2. Appuyez complètement sur les leviers de blocage (A) sur les deux charnières de la porte. , puis appuyez sur ou sur pour définir la durée du processus de nettoyage. 6.
FRANÇAIS Une fois le nettoyage terminé, suivez les étapes ci-dessus en sens inverse. Installez d'abord le plus petit des panneaux, puis le plus grand, et terminez par la porte. AVERTISSEMENT! Assurez-vous que les panneaux en verre sont insérés dans la bonne position, car la surface de la porte pourrait surchauffer. Veillez à replacer les panneaux de verre (C, B et A) dans le bon ordre.
www.aeg.com 11.1 En cas d'anomalie de fonctionnement Anomalie Cause possible Solution Vous ne pouvez pas allumer Le four n'est pas branché à le four ni le faire fonctionner. une source d'alimentation électrique ou le branchement est incorrect. Vérifiez que le four est correctement branché à une source d'alimentation électrique (reportez-vous au schéma de branchement). Le four ne chauffe pas. Le four est désactivé. Mettez le four en marche. Le four ne chauffe pas. L'horloge n'est pas réglée.
FRANÇAIS 35 Anomalie Cause possible Solution L'affichage indique « F102 ». • Vous n'avez pas entière- • Fermez entièrement la ment fermé la porte. porte. • Le verrouillage de la por- • Éteignez le four à l'aide te est défectueux. du fusible de l'habitation ou du disjoncteur situé dans la boîte à fusibles, puis allumez-le de nouveau. • Si l'affichage indique de nouveau « F102 », contactez le service aprèsvente.
www.aeg.com Anomalie Cause possible Solution De l'eau s'écoule du bac de la cavité. Le bac de la cavité est trop rempli. Éteignez le four et assurezvous que l'appareil est froid. Épongez l'excédent d'eau. Versez la quantité d'eau adaptée dans le bac de la cavité. Reportez-vous à la procédure correspondante. L'appareil est allumé mais il ne chauffe pas. Le ventilateur ne fonctionne pas. L'affichage indique "Demo". Le mode démo est activé. 1. 2. 3. 4. Éteignez le four.
FRANÇAIS 37 12. RENDEMENT ÉNERGÉTIQUE 12.1 Fiche du produit et informations conformément à la norme EU 65-66/2014 Nom du fournisseur AEG Identification du modèle BPB351020M Index d'efficacité énergétique 81.2 Classe d'efficacité énergétique A+ Consommation d'énergie avec charge standard et mode traditionnel 1.09 kWh/cycle Consommation d'énergie avec charge standard et mode air pulsé 0.
www.aeg.com Chaleur Tournante Humide Fonction conçue pour économiser de l'énergie en cours de cuisson. Son fonctionnement est tel que la température dans la cavité du four peut être différente de la température affichée durant le cycle de cuisson et les temps de cuisson peuvent différer des temps de cuisson d'autres programmes. Lorsque vous utilisez la fonction Chaleur tournante humide, l'éclairage s'éteint au bout de 30 secondes. 13.
FRANÇAIS 39
867335708-A-452016 www.aeg.