User manual

Description Value to set
7 BRIGHTNESS LOW / MEDIUM / HIGH
8 SERVICE MENU -
9 RESTORE SETTINGS YES / NO
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
1. Press and hold for 3 seconds.
The display shows SET1 and "1" flashes.
2. Press or to set the setting.
3. Press .
4. Press or to change the value
of the setting.
5. Press .
To exit the Settings menu, press
or
press and hold .
10.5 Automatic Switch-Off
For safety reasons the oven turns off
automatically after some time, if a
heating function works and you do not
change any settings.
(°C) (h)
30 - 115 12.5
120 - 195 8.5
200 - 245 5.5
250 - maximum 3
Pyrolysis 4.5
The Automatic Switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for
the next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
10.7 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
ENGLISH 21