User manual

Clock function Application
MINUTE MINDER Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
00:00 COUNT UP TIMER If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates. It is on immediately when the oven
starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows and
"12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set
the minutes.
The display shows and the set
hour. "00" flashes.
3.
Press
or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
6.3 Setting the DURATION
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press
or to set the minutes and
then the hours for DURATION time.
Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes. and time
setting flash in the display. The appliance
deactivates automatically.
4. Press any button or open the oven
door to stop the acoustic signal.
5. Turn the knob for the oven functions
to the off position.
6.4 Setting the END
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press
or to set the hours and
then the minutes for END time. Press
to confirm.
At the set time an acoustic signal sounds
for 2 minutes. and time setting flash
in the display. The appliance deactivates
automatically.
4. Press any button or open the oven
door to stop the acoustic signal.
5. Turn the knob for the oven functions
to the off position.
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Press or to set the minutes and
then the hours for DURATION time.
Press
to confirm.
The display shows flashing .
4. Press
or to set the hours and
then the minutes for END time. Press
to confirm.
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
ENGLISH
11