Operation Manual
7
ENGLISH
BS2E 7.2 T, BS2E 9.6 T, BS2E 12 T, BS2E 14.4 T, POWERBASE 60
After inserting the battery into the reception of the charger the battery will
automatically be charged.
If the battery is too hot (over approx .45
o
C) the charger switches to maintenance
charge. Remove battery, allow to cool down and insert again.
If the battery is too cold (less than approx. 0
o
C) no charging takes place. After
warming up of the battery charging takes up automatically; the battery can stay in the
charger.
The battery’s charging time is between 10 min and 60 min (at 1,4 Ah), depending on
the state of discharge.
As soon as charging is completed, the charger switches over to ”trickle” charge to
maintain the full capacity.
The battery can be stored permanently in the charger without the danger of being
overcharged.
The battery charger can be used either standing up or fixed to a wall (see
illustration).
Brief description
POWERBASE 60
Laden
voll
Zu heiß
Zu kalt
RC
Universal
12
VOLT
9.6 VOLT
9.6 VOLT
1.7Ah
20.4 Wh
14,4
VOLT
12 V9,6 V7,2 V 14.4 V
Modifications: Text, diagrams and data are
correct at the time of printing. In the interest
of continuous improvement of our products,
technical specifications are subject to
alteration without prior notice.
Indication of the control light after mains
connection:
– Off charger ready
– indicating battery pack is charged
maintenance charging
battery pack too hot/too cold
– continuous quick charging
Characteristics
Laden
Ladebereit
voll
Laden
Ladebereit
voll
Laden
Ladebereit
voll