BS7304001 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 10 12 15 17 19 21 23 27 28 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information • • • • 5 Make sure that the appliance is installed below and adjacent safe structures. Keep the minimum distances to the other appliances and units. The appliance cannot be positioned on a base. Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer. Electrical connection • The appliance must be earthed.
Safety information Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 – Disconnect the appliance from the power supply. – Cut off the mains cable and discard it. – Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
Product description Oven accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Grill / roasting pan To bake and roast or as pan to collect fat. • Steam set Unperforated and perforated food container.
Before first use 9 • Sponge 150 For absorbing residual water from the steam generator. • Core Temperature Sensor To measure how far the food is cooked. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds.
Control panel If you do not touch at the end, the settings save automatically after five seconds. CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function - DISPLAY Shows the current settings of the appliance. 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Straight access to the oven function when the appliance is off.
Control panel Sensor Field Function MINUTE MINDER 10 11 Description To set the minute minder. Display 1 2 7 1 2 3 4 5 6 7 3 6 5 4 Oven function symbol Temperature/Time display Clock/Residual heat display (also Minute minder and Time of day) Residual heat indicator Indicators for the clock functions (refer to the table "Clock functions") Heat up indicator Number of oven function/programme Other indicators of display Symbols / / Name Description Options You can choose an oven function.
Daily use When the appliance is at the set temperature Heat up indicator goes off the display. DAILY USE WARNING! Refer to "Safety information" chapter. To operate the appliance you can use: • manual mode -to set an oven function, the temperature and the cooking time manually. • automatic programmes -to prepare a dish when you do not have a knowledge or experience in cooking. Setting the oven function 1. Touch . The display shows a preset temperature, symbol and number of the oven function.
Daily use Oven function 13 Application 8 Slow Cook 9 Conventional Cooking To bake and roast food on one shelf position. 10 Frozen Foods To make your convenience food like e.g. French Fries, Wedges, spring rolls crispy. 11 Turbo Grilling To roast larger meat joints or poultry with bones on one shelf position. Also to gratinate and to brown. 12 Fast Grilling 13 Grilling 14 Keep Warm 15 Defrost 16 Bottom Heat To bake cakes with a crispy base, and to preserve food.
Daily use Fast heat up function The fast heat up function decreases the heat up time. Do not put food in the oven when the fast heat up function operates. Activating the fast heat up function : Touch and hold for more then three seconds. If you activate the fast heat up function, the bars on the display flash one by one to show that the function operates. The fast heat up is not available with every oven function. An acoustic signal operates if the fast heat up is not available for set function.
Clock functions 15 Energy saving The appliance has same features that help you save energy during everyday cooking: • Residual heat: – the oven function or programme operates: the heating elements are deactivated 10% time earlier (the lamp and fan continue to operate). The condition: the cooking time is longer then 30 minutes or you use the clock functions (Duration, End, Time delay). – the oven is off: you can use the heat to keep the food warm.
Clock functions 2. Touch again and again until the display shows . flashes in the display. or to set minutes for DURA3. Use TION. to confirm 4. Touch or to set hours for DURATION. 5. Use If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. 6. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal.
Automatic programmes 17 TION function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END ").
Automatic programmes 2. Touch or to choose the automatic recipes. or the automatic recipe activates automatically after five seconds. 3. Touch 4. When set time ends, an acoustic signal operates for two minutes. Symbol flashes. The appliance deactivates. 5. Touch any sensor field or open the oven door to stop an acoustic signal. Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Touch again and again until the display shows .
Using the accessories • Deactivating the my favourite programme function: Touch 19 . When the my favourite programme function operates, you can change the time and temperature. USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter. Core Temperature Sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appliance deactivates.
Using the accessories While the appliance calculates the approximate duration time, the value of the Count Up Timer function shows in the Timer/Residual heat display. When the first calculation ends, the Timer/Residual heat display shows - , and then the approximate duration of the cooking. The appliance continues to calculate the duration during the cooking. The display updates at intervals with the new duration value. 7. When the meat is at the set core temperature, the core temperature and flash.
Additional functions 21 Inserting the wire shelf and pan together Put the wire shelf on the pan. Push the pan between the guide-bars of one of the shelf positions. ADDITIONAL FUNCTIONS Child safety You cannot activate the appliance on if the child safety device operates. Activating/Deactivating the child safety device: 1. Deactivate the appliance . Do not set any oven function. at the same time for minimum 2 seconds. 2. Touch and hold and 3. An acoustic signal sounds.
Additional functions eight settings (from SET1 to SET7). The number of the settings is different for different models. Look into the table below to see the possible value of each setting.
Care and cleaning 23 Brightness of the display There are two modes of display's brightness: • Night brightness - when the appliance is off, the brightness of the display is lower between 22:00 and 06:00; • Day brightness: – when the appliance is on; – if you touch any of the sensor fields during night brightness (apart from ON/OFF), the display goes back to day brightness mode for next 10 seconds; – if the appliance is off and you set the minute minder.
Care and cleaning Remove water from the steam generator with the Sponge 150 and rub dry. Keep the door open for approximately 1 hour to let the appliance dry fully. You can use the End function to delay start of cleaning process (refer to "Setting the END"). Shelf support You can remove the shelf support to clean the side walls. Removing the shelf support 1. Carefully pull the support up and out of the front catch. 2. Lightly move the support on the front catch inwards. 3.
Care and cleaning 25 Remove a lime residue with water and vinegar. CAUTION! Chemical de-scaling agents can damage oven enamel. Obey instructions of the manufacturer! Cleaning the Water Tank and the Steam Generator: 1. Fill the water and vinegar mixture (approximately 250 ml) through the water tank in the steam generator. Wait for approximately 10 minutes. 2. Remove the water and vinegar with the Sponge 150. 3. Use clean water (100-200 ml) to flush the steam generation system through the water tank. 4.
Care and cleaning Use the same oven lamp type. 5. Install metal frame and seal and tighten screws. 6. Install the left shelf rail. Oven door and glass panels To clean the oven door, remove it. CAUTION! Be careful when you remove the door from the appliance. The door is heavy! Removing the oven door 1. Open the oven door as far as it goes. 2. Fully press clamping levers (A) on the two door hinges. 3. Close the oven door until the first position (angle approximately 70°). 4.
What to do if… 27 4. Hold the door glass panels on their top edge one by one and pull them up out of the guide 5. Clean the door glass panels. To install panels follow the procedure in reverse. Install the smaller panel first, then the larger. WHAT TO DO IF… WARNING! Refer to "Safety information" chapter. Problem Possible cause Solution The appliance does not heat up The appliance is deactivated Activate the appliance The appliance does not heat up The time of day is not set Set the clock.
Environment concerns The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) ......................................... ......................................... ......................................... ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
www.aeg-electrolux.