Operation Manual

Problem Possible cause Remedy
The display shows "C2". You want to start the Defrost
function, but you did not re-
move the core temperature
sensor plug from the socket.
Remove the core tempera-
ture sensor plug from the
socket.
The display shows an error
code that is not in this table.
There is an electrical fault. • Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
14. ENERGY EFFICIENCY
14.1 Product Fiche and information according to EU 65-66/2014
Supplier's name AEG
Model identification
BS7304001M
BS7304021M
BS730410KM
Energy Efficiency Index 98.8
Energy efficiency class A
Energy consumption with a standard load, conven-
tional mode
1.09 kWh/cycle
Energy consumption with a standard load, fan-forced
mode
0.83 kWh/cycle
Number of cavities 1
ENGLISH 45