User manual

CLOCK FUNCTIONS
Clock functions
Symbol Function Description
Minute Minder
To set a countdown (max 2 hours 30 minutes). This function has
no effect on the operation of the appliance. You can also acti-
vate it in off state. Use
to activate the function. Press or
to set the minutes and OK to start.
Duration
To set how long the appliance has to be in operation (max. 23 h
59 min).
End Time
To set the switch-off time for a heating function (max. 23 h 59
min).
You can use Duration and End Time at the same time, if you want to automatically activate
and deactivate the appliance on a given time later.
If you set the time for a clock function, the time starts to count down after 5 seconds.
If you use the clock functions Duration and End Time , the appliance deactivates the heat-
ing elements after 90 % of the set time. The appliance uses the residual heat to continue
the cooking process until the time ends (3 - 20 minutes).
Setting the clock functions
1. Set the heating function.
2. Press
again and again until the display shows the necessary clock function and the
related symbol.
3. Press
or to set the necessary time. Press OK to confirm.
After 90 % of the set time, an acoustic signal sounds. The appliance deactivates. The
display shows a message.
4. Press a sensor field to stop the signals.
With Duration and End Time the appliance deactivates automatically.
With Duration and End Time you must set the heating function and the temperature first.
Then you can set the clock function.
When you use Core Temperature Sensor, Duration and End Time do not work.
Heat + Hold
You can activate or deactivate the function in the Basic Settings menu.
The Heat + Hold function keeps prepared food warm at 80°C for 30 minutes. It activates
after the baking or roasting procedure ends.
16 Clock functions