User manual
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking . Press OK to confirm.
3. Select the category and dish. Press OK to confirm.
4. Select the Weight Automatic . Press OK to confirm.
5. Touch
or to set the food weight. Press OK to confirm.
The automatic programme starts. You can change the weight at any time. Press
or
to change the weight. When the time ends, an acoustic signal sounds. Press a sensor field
to deactivate the signal.
With some programmes turn over the food after 30 minutes. The display shows a reminder.
USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chapter.
Core temperature sensor
The core temperature sensor measures the core temperature of the meat. When the meat
reaches the set temperature the appliance deactivates automatically.
You have to set:
• The oven temperature
• The core temperature
Use only correct replacement parts. It ensures the best cooking result.
Using the core temperature sensor:
1. Put the tip of the core temperature sensor into the centre of the meat.
2. Activate the appliance.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows the core temperature
sensor.
4. Press
or in less than 5 seconds
to set the core temperature.
5. Set the oven function and, if necessary,
the oven temperature.
The appliance calculates an approximate
end time. The end time is different for
the different quantities of the food, the
set oven temperatures (minimum
18 Using the accessories