Operation Manual

6.10 Water drawer
XAM
A
B
C
F
E
D
A. Lid
B. Wave-breaker
C. Drawer body
D. Water-filling hole
E. Scale
F. Front button
You can remove the water drawer from
the appliance. Push it gently on the front
button.
After you push the water drawer, it will
self-extract from the appliance.
MAX
You can fill the water drawer in two ways:
leave the water drawer inside the
appliance and fill it by means of a
water jar,
detatch the water drawer from the
appliance and fill it from a water tap.
When you fill the water drawer from the
water tap, carry the drawer in the
horizontal position in order to avoid
water spilling.
MAX
MAX
When you fill the water drawer, insert it in
the same position. Push the front button
until the water drawer is inside the
appliance.
Empty the water drawer after each use.
CAUTION!
Keep the water drawer away
from hot surfaces.
6.11 Steam cooking
The water drawer cover is in the control
panel.
WARNING!
Use only cold tap water. Do
not use filtered
(demineralised) or distilled
water. Do not use other
liquids. Do not put
flammable or alcoholic
liquids into the water
drawer.
1. Press the cover of the water drawer
to open it and extract it from the
appliance.
2. Fill the water drawer with cold water
to the maximum level (around 950
ml).
The water supply is sufficient for
approximately 50 minutes.
Use the scale on the water drawer.
3. Put the water drawer to its initial
position.
www.aeg.com
22