Operation Manual
If the water drawer is wet
after you fill it with water,
wipe it with a soft cloth
before you insert it in the
appliance.
4. Prepare the food in the correct
cookware.
5. Activate the appliance.
6. Select a steam heating function and
the temperature.
7. If necessary, set the function
Duration or End Time .
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is
at approximately the set
temperature.
The signal sounds at the end of the
cooking time.
8. Deactivate the appliance.
9. Empty the water drawer after the
steam cooking is completed.
CAUTION!
The appliance is hot.
There is a risk of burns.
Be careful when you
empty the water drawer.
When the water drawer is
running out of water, an
acoustic signal sounds and
the water drawer needs to
be refilled to continue the
steam cooking as described
above.
Let the appliance dry fully
with the door open.
To speed up the drying you
can heat up the appliance
with hot air at temperature
150 °C for approximately 15
minutes.
Steam can condensate on the bottom of
the cavity and the visibility inside the
appliance can be limited. If this occurs,
dry the cavity when the appliance is cool.
At the end of a steam
cooking cycle, the appliance
cooling fan runs at a higher
speed to evacuate in a
better way the excess of
steam. This is normal.
6.12 SousVide Cooking
• With no evaporative losses of flavour
volatiles and moisture, food keeps its
full aroma
• Tender texture of meat and fish
• Food keeps all minerals and vitamins
• Less spices are necessary as food
keeps its natural flavour
• Better workflow as it is not necessary
to prepare and serve food at the
same time and place
• Low cooking temperature minimizes
the risk of overcooking
• Portioning of the food makes it easy
to hold
Preparing the food
1. Clean and cut the ingredients.
2. Season the ingredients.
3. Fill the ingredients in suitable
vacuum bags.
4. Vacuum seal the bag to make sure
that you remove as much air as
possible.
5. Cold storage of the bags is
mandatory in case the cooking
procedure is not done immediately.
6. Continue with the function: SousVide
Cooking following applicable
cooking table indications for the
considered type of food or the
assisted cooking recipes.
7. Open the pouch and serve.
8. Optional: finish the food with a final
searing or grilling e.g. for meat to
achieve a nice crust and the typical
roast flavour.
Activating a function: SousVide
Cooking mode
1. Activate the appliance.
2. Select the menu: SousVide Cooking.
3. Press
to confirm.
4. Set the function: SousVide Cooking
mode.
5. Press to confirm.
6. Set the temperature.
7. Press
to confirm.
ENGLISH
23