Operation Manual

Menu item Description
Elapsed Time Show, hide or reset the timer that counts up when
pressing the start button. The elapsed time is only
available while the oven is active.
7.15 Setting the clock
functions
When you use the core
temperature sensor, the
functions Duration and End
do not operate.
You can change the time and date when
you touch the clock on the display, when
the appliance is active.
1. Go to menu: Heating Functions.
2. Set the heating function and the
temperature.
3. Touch or go to the menu: Timers.
4. Choose a clock function.
5. Scroll the list to set the necessary
time. Wait a few seconds for the time
to set itself automatically or touch to
confirm: h or min. You can delete the
settings if you touch: x.
When the clock function ends, an
acoustic signal sounds and a message
comes on the display. You can stop or
extend the cooking process.
7.16 Submenu for: Options
Further individual settings related to
safety, convenience and oven lamp.
Menu item Description
Lamp On / Off Switch the oven lamp on or off.
Child Lock On / Off Once activated it locks the screen and all buttons.
They remain locked both in ON and OFF posi-
tions. To unlock touch the display and follow in-
structions. If unlocked you need to lock it again via
menu.
Screen Lock Screen lock temporarily 'locks' the touch screen
and all buttons except the power key. To unlock
touch the display and follow instructions.
Heat + Hold Heat + Hold is only available when a duration is
set. The oven will not completely switch off auto-
matically but keep the food warm for 30 minutes. It
is not available for all programmes. If active, an
icon is shown on the display.
Set + Go Set+Go lets you set an oven function with duration
to use it later by only touching the screen. The
screen lock is active when the cooking process
starts.
The function is visible in the menu only when the
duration is set.
www.aeg.com20