User manual

Heating function Application
ECO Roasting When you use this function during cooking, it al-
lows you to optimize the energy consumption. To
get more information about the recommended
settings, refer to the cooking tables with the
equivalent function (Turbo Grilling).
The lamp may automatically
deactivate at a temperature
below 60 °C during some
oven functions.
7.4 Activating a heating
function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press to confirm.
4. Select a heating function.
5. Press to confirm.
6. Set the temperature.
7. Press
to confirm.
7.5 Steam cooking
The water drawer cover is in the control
panel.
WARNING!
Do not put water directly
into the steam generator.
Use only water. Do not use
filtered (demineralised) or
distilled water. Do not use
other liquids. Do not put
flammable or alcoholic
liquids into the water
drawer.
1. Prepare the food in the correct
cookware.
2. Press the cover of the water drawer
to open it.
3. Fill the water drawer with 800 ml of
water.
The water supply is sufficient for
approximately 50 minutes.
4. Push the water drawer to its initial
position.
5. Activate the appliance.
6. Select a steam heating function and
the temperature.
7. If necessary, set the function
Duration
or End Time .
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is
at approximately the set
temperature.
When the steam generator is
empty, an acoustic signal
sounds.
The signal sounds at the end of the
cooking time.
8. Deactivate the appliance.
CAUTION!
The appliance is hot.
There is a risk of burns.
Be careful when you
empty the water tank.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with
the door open.
7.6 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
7.7 Fast Heat Up Indicator
This function decreases the heat-up time.
Do not put food in the oven
when the Fast heat up
function operates.
To activate the function, hold for 3
seconds. The heat-up indicator
alternates.
www.aeg.com
14