User manual

Heating function Application
Plate Warming To preheat your plate for serving.
Steam Regenerating To reheat already cooked food directly on a plate.
ECO Roasting The ECO functions let you optimize the energy
consumption during cooking. It is necessary to set
the cooking time first. To get more information
about the recommended settings, refer to the
cooking tables with the equivalent function.
6.4 Activating a heating
function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press to confirm.
4. Set a heating function.
5. Press to confirm.
6. Set the temperature.
7. Press
to confirm.
Press once or twice to go directly to
the menus: Heating Functions, Assisted
Cooking.
6.5 Steam cooking
The water drawer cover is in the control
panel.
WARNING!
Do not put water directly into
the steam generator. Use only
water. Do not use filtered
(demineralised) or distilled
water. Do not use other
liquids. Do not put flammable
or alcoholic liquids into the
water drawer.
1. Press the cover of the water drawer
to open it.
2. Fill the water drawer with 800 ml of
water.
The water supply is sufficient for
approximately 50 minutes.
3. Push the water drawer to its initial
position.
4. Activate the appliance.
5. Prepare the food in the correct
cookware.
6. Select a steam heating function and
the temperature.
7. If necessary, set the function
Duration
or End Time .
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature.
The signal sounds at the end of the
cooking time.
8. Deactivate the appliance.
9. Let the appliance dry fully with the
door open.
10. Empty the water drawer after the
steam cooking is completed.
The appliance is hot. There is a risk of
burns. Be careful when you empty the
water drawer.
When the steam generator is
empty, an acoustic signal
sounds.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with
the door open.
6.6 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
ENGLISH
13