User manual

4. Cover the Food Sensor with the
remaining ingredients.
5. Put the plug of the Food Sensor into
the socket at the front of the
appliance.
The display shows the Food Sensor
symbol.
6. Set the core temperature.
7. Set a heating function and, if
necessary, the oven temperature.
When the dish reaches the set
temperature, an acoustic signal sounds.
The appliance deactivates automatically.
8. Press the rotary knob to stop the
signal.
9. Remove the Food Sensor plug from
the socket and remove the dish from
the appliance.
WARNING!
There is a risk of burns as the
Food Sensor becomes hot.
Be careful when you unplug
it and remove it from the
food.
Changing the core
temperature
You can change the core temperature
and the oven temperature at any time
during cooking.
1. Select on the display.
2. Turn the rotary knob to change the
temperature.
3. Press to confirm.
8.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above and make
sure that the feet point down.
www.aeg.com
22