User manual

Problem Possible cause Remedy

The cleaning function is in-

terrupted before it finishes.

The function was stopped by

the user.

Repeat the procedure.

There is no good perform-

ance of the cleaning proce-

dure.

You did not remove the side

grids before the start of the

cleaning procedure. They

can transfer heat to the walls

and decrease the perform-

ance.

Remove the side grids from

the appliance and repeat the

function.

14.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance

cavity. Do not remove the rating plate

from the appliance cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

15. INSTALLATION

WARNING!

Refer to Safety chapters.

15.1 Building in

The built-in unit must meet

the stability requirements of

DIN 68930.

min.

3 mm