User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. OPERATING THE APPLIANCE
- 5. BEFORE FIRST USE
- 6. DAILY USE
- 7. CLOCK FUNCTIONS
- 8. USING THE ACCESSORIES
- 9. ADDITIONAL FUNCTIONS
- 10. HINTS AND TIPS
- 10.1 Inner side of the door
- 10.2 Advice for special heating functions of the oven
- 10.3 Full Steam
- 10.4 Grill + Fan and Full Steam in succession
- 10.5 Humidity High
- 10.6 Humidity Low Pro
- 10.7 Steam Regenerating
- 10.8 Baking
- 10.9 Tips on baking
- 10.10 Baking on one level:
- 10.11 Bakes and gratins
- 10.12 Moist Fan Baking
- 10.13 Multilevel Baking
- 10.14 True Fan + Bottom
- 10.15 Roasting
- 10.16 Roasting tables
- 10.17 Grill
- 10.18 Bottom + Grill + Fan
- 10.19 Slow Cooking
- 10.20 Preserving
- 10.21 Drying
- 10.22 Bread Baking
- 10.23 Food Sensor table
- 10.24 Information for test institutes
- 11. CARE AND CLEANING
- 11.1 Notes on cleaning
- 11.2 Recommended cleaning products
- 11.3 Removing the shelf supports
- 11.4 Steam Cleaning
- 11.5 Cleaning Reminder
- 11.6 Steam generation system - Descaling
- 11.7 Descaling reminder
- 11.8 Steam generation system - Rinsing
- 11.9 Tank emptying
- 11.10 Removing and installing the door
- 11.11 Replacing the lamp
- 12. TROUBLESHOOTING
- 13. TECHNICAL DATA
- 14. ENERGY EFFICIENCY
• Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
• If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
• To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
• Use only the food sensor (core temperature sensor)
recommended for this appliance.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instruction
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is
installed below and adjacent safe
structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
• The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
• Do not let mains cables touch or
come near the appliance door,
especially when the door is hot.
• The shock protection of live and
insulated parts must be fastened in
www.aeg.com
4