Manual

English
33
Description of the USB controls
(1/2)
You can pause and continue music playback. Press again to
continue playback.
(5/4)
Press1x= Skiptotheprevioussong.
Press2x= Skiptothesongbeforetheprevioussong.
NOTE:
The number of the current title is displayed briefly.
(5/4)
Presstoskiptothenextsongandthefollowingsongs.
NOTE:
The number of the current title is displayed briefly.
RPT/LED (3)
Press briefly:
Activates the Repeat function.
• Alltitlesareconstantlyrepeatedbydefault.
The “
” symbol is displayed.
• Pressthebuttontorepeatonlythecurrenttitle.
The “ ” symbol flashes.
Keep pressed: Turns the indicator lamp (7) on and/or off.
RAN (8)
Activates random playback. All titles are played back in a
random sequence. To deactivate the function again, press
theRPT/LEDbutton2x.
NOTE:
The activated function cannot be displayed for technical
reasons.
/ (7)
Iffoldersexist,thenextorpreviousfolderisselected.Play-
back is stopped and the “
” symbol appears. The selected
folder (e.g. 04) and the number of the title with which play-
back begins are displayed (e.g. 0016).
OK (4)
Playback starts in the previously selected folder.
Cleaning
• Beforecleaningdisconnectfrommainspowersupply.
• Cleanthedevicewithasoftdampclothwithoutdeter-
gents.
• Donotsubmergethedeviceinwater.
Troubleshooting
Fault Cause Solution
Unit cannot be
operated.
Unit crashes
and “hangs”.
Disconnect from the
mains for around
5 seconds. Then switch
the unit on again.
No audio signal
via the Bluetooth
connection
Speaker is not
paired to the
audio source.
Check whether a connec-
tionexists.Ifnecessary,
pair the speaker again to
the audio source.
Volume too
low
Increase the volume on
the speaker
Increase the volume on
the audio source.
Speaker cannot
be connected
Pairing does
not work
Check whether the audio
source supports the
A2DP protocol.
Audio source
is switched off
Switch on the audio
source
Bluetooth is
switched off
at the audio
source.
Switch on the Bluetooth
function in the audio
source.
Bluetooth
version is not
supported.
Use a different playback
unit.
Music tracks are
played back via
USB in the wrong
sequence.
Random
playback is
activated.
Press the RPT/LED button
2x(3).
Technical Specifications
Model: ...........................................................................BSS 4803 BT
Power supply: ...............................................100-240 V~ 50/60 Hz
Power Consumption:................................................................50 W
Protection class: ................................................................................II
Net weight: ................................................................approx.2.5kg
Bluetooth
Bluetooth support: ........................................................V2.0 + EDR
Range: ..................................................................approx.15metres
Transmission frequency: ......................................................2.4 GHz
Protocols: ...........................................................A2DP 1.2, AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
NOTE:
After about 60 minute without a signal, the device will
automatically switch to standby.