User guide

English

2. Press the button(11).Thehourswillstarttoash.

3. Set the hours using the /SEEK+/ /SEEK- buttons (9/10).

4. Press the buttonagain.Theminuteswillstarttoash.

5. Set the minutes using the /SEEK+/ /SEEK- button.

6. Press the button once more in order to save the time.

NOTE:

If the battery is completely empty, the time must be reset.

Radio mode

1. Press the “M” button (12) repeatedly until “FM” is shown on the display.

2. Automatically search for radio stations:

 Keepthe10+/CH-button(7)orthe100+/CH+button(8)pressedforapprox.

2 seconds. The unit scans the complete frequency band for stations. The radio stations

found are stored in ascending order of frequency. The sequence cannot be altered

later.

NOTE:

Anypresetradiostationswillbeoverwritten.

To look for a radio station manually and preset it:

a) Selectthechannellocationwhereyouwanttopresetthestation.Youcanselecta

channellocationbybrieypressingthe10+/CH-button(7)orthe100+/CH+but-

ton (8).

b) Brieypressthe /SEEK+/ /SEEK- button (9/10), until you have found the radio

station which you are looking for. If you keep the button pressed, the device will

keepsearchinguptothenextand/orpreviousradiostation.

c) Keep the button (11) pressed until the channel location is shown. The radio

station is now preset.

3. The aerial is built into the device. If the reception is too weak and the station that has

been tuned into has interference, try changing the position of the device in order to

improve the reception.

Select the preset radio station

Brieypressthe10+/CH-and/orthe100+/CH+button(7/8)inordertoselectthepreset

radio station.