Operating instructions

Energy Saving Tips

• Do not install the appliance near boilers, radiators or other sources

of heat. High ambient temperatures cause longer, more frequent

operation of the compressor.

• Ensure sufficient air circulation and exhaust at the appliance base

and at the back wall of the appliance. Never cover air vent openings.

• Do not place warm foods into the appliance. Allow warm foods to

cool first.

• Do not leave the door open any longer than necessary.

• Do not set temperature any colder than necessary.

• Put frozen food in the fridge to defrost. The cold in the frozen food

will then be used to cool the fridge.

An accumulation of dust will affect the performance of the appliance

and cause excessive electricity consumption. The structure of the appli-

ance permits you to clean the rear zone close to the wall, using a vac-

uum cleaner.

☞

1. Remove the plinth (1), then the venti-

lation grid (2);

2. Carefully pull the air deflector out (3),

checking that there is no water left

from the defrosting.

S.I.013

Downloaded from Fridge-Manual.com Manuals