Operating instructions
Table Of Contents
- 1 Notes on these Operating Instructions
- 2 General Information
- 3 Safety
- 4 Set-Up and Operation
- 5 Commissioning
- 6 Electrical Start-Up
- 7 Interfaces and communication
- 8 Signalling and Error Correction
- 9 Parallel operation
- 10 Maintenance
- 11 Storage, Dismantling and Disposal
- 12 Glossary
22
Handle the components with care. Please take into account
the weight. It may be necessary to engage the help of a
second person.
4.2 Transportation to the site
The Protect C provides for easy transportation to the site of
installation transport rolls. It is recommended to position the
USP such that
♦ the connection tasks can be performed easily;
♦ there is enough space for perfect operation and if
necessary for periodical and exceptional maintenance;
In this context the cables should be long enough, to be
able to move the UPS (for opening the UPS) without
switching it off;
♦ the UPS is Protected against atmospheric influences;
♦ the humidity and the temperature remain in the specific
range;
♦ the fire Protection norm are complied.
The battery life time depends strongly of the environmental
temperature. The temperature should lie between +15° and
25° C.
Attention!
Only transport the
Protect C in upright position.
Don’t
tilt or put on the edges! Prevent
dislocation of centre of gravity!
Be sure not to store or use any magnetic storage media near
the Protect C.