Operating and installation instructions Competence 6192D-M Cooker Hood
CONTENTS 1. General Information Page 1 2. Safety Warnings Page 1 3. Installation Instructions Page 2 4. Use and Maintenance Information Page 4 5. Trouble shooting Page 6 6. Diagrams Page 7 7.
General Information Carefully read the following important information regarding installation, safety and maintenance of your appliance. This appliance has been designed for use in the venting mode (air exhaust to the outside – Fig.1B), recirculation mode (air circulation on the inside – Fig.1A) or with venting mode with external motor (Fig.1C).
Before connecting the model to the electricity network Check the data plate (positioned inside the appliance) to ascertain that the voltage and power correspond to the local electrical requirements. If in doubt contact a qualified electrician. Installation Instructions Qualified technicians must carry out the installation and electrical connections of the appliance. We recommend that you contact our customer care center on 0860 234 481/2/3 for details of a qualified technician.
filter(s) (Fig.5) so that the unit is easier to handle. In the case of assembly of the appliance in the venting version prepare the hole for evacuation of the air. Fixing to the wall Drill the holes A respecting the distances indicated (Fig.2). Fix the appliance to the wall and align it in horizontal position to the wall units. When the appliance has been adjusted, fix the hood using the screws A. For the various installations use screws and screw anchors that are suitable to the type of wall (e.g.
The charcoal filters must be fitted in the ducting unit located inside the hood.
Clean the fan and other surfaces of the cooker hood regularly using a damp cloth moistened with denatured alcohol or non-abrasive liquid detergent. The illumination installation is designed for use during cooking and not for prolonged general illumination of the environment. Prolonged use of the illumination installation notably reduces the duration of the bulb. Use a one-edged screwdriver or any other appropriate tool to lift and remove the overhead light fixture. Replace the damaged lamp.
Troubleshooting Problem Possible reason Solution Hood doesn’t work No electric supply Check the plug is connected Check the main switch is turned on Poor airflow Aluminum grease filters Clean the filters and replace when dry clogged Charcoal filters clogged Motor running but no Butterfly valve jammed Replace the charcoal filters Contact technician air flow Motor cuts after a few High temperature safety The minutes device activated kitchen is not sufficiently ventilated The hood is installed
Fig. 1 Fig.
Fig. 3 Fig.
Fig. 5 Fig.
Fig. 7 Fig.
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste.
