Operation Manual

g
40
6 Making Coffee with Beans
The following process for making cof-
fee with beans runs completely auto-
matically: Grinding, portioning,
pressing, pre-brewing, brewing, ejec-
tion of the coffee grounds.
The facility to select the grinding tex-
ture and the coffee quantity allows
you to individually set up the coffee
machine to your own personal taste.
1
Ensure that you use only pure coffee
beans with no caramelised or aroma-
tised additives. Do not use frozen
beans.
6.1 Filling the Coffee Bean
Container
0 Turn the bean container to the „Coffee
Beans“ position
( Fig. 10) . The mech-
anism sets to the required function
.
0 Set the grinding texture (Fig. 11).
Using the grinding texture adjustment
(Fig. 2, V) you can set the grinding tex-
ture of the grinder.
1
Note! Before putting beans into the
coffee machine for the first time, you
can set the grinding texture once with
the grinder stationary. Once the
grinder has been filled with beans, the
setting can be changed only while
grinding is proceeding. Otherwise the
coffee machine could be damaged.
3
The grinder is factory-set to a medium
grinding texture. Notes on changing
the grinder setting can be found in
„Setting the Grinding Texture" page 45.
0 Raise the lid of the coffee bean con-
tainer, and fill the container with fresh
coffee beans (Fig. 12). Then reclose the
lid.
1
Note! Make sure that no foreign bod-
ies, such as stones, enter the coffee
bean container. Damage caused by for-
eign bodies in the grinder is excluded
from the guarantee.
6.2 Select Cup Size
Depending on your taste, select a
„short“ espresso or a „long“ milky cof-
fee.
0 For this press the „Cup Size“ key (Fig. 3,
d) until the desired cup sym-
bol is selected or the desired cup size is
indicated on the display.
The cup sizes are indicated as follows:
3
The bottom line in the display shows
the coffee quantity. The procedure for
changing this is described in the fol-
lowing section.
3
The machine is set to standard quanti-
ties at the factory. Instructions for
changing the set coffee quantities are
to be found under „Programming the
cup measure and the coffee quantity"
on page 44.
6.3 Selecting the coffee quantity
0 Press the „Coffee Quantity“ key (Fig. 3,
c) until the desired coffee
quantity symbol lights or the desired
coffee quantity is selected on the dis-
play.
The coffee quantities are indicated as
follows:
«CUP SMALL»Espresso cup
«CUP MEDIUM»Coffee cup
«CUP LARGE»Coffee mug
«EXTRA MILD» extra mild
«MILD» mild
«NORMAL»normal
«STRONG»strong
«EXTRA-
STRONG»
extra strong
822_949_320 CP3500_denepf.book Seite 40 Freitag, 16. September 2005 12:04 00