Operation Manual

g
46
3
After the programming, the display
returns in the main menu to the menu
point «LANGUAGE».
0 To return to the coffee mode, press the
„Menu“ key (Fig. 3, f) or wait ca.
30 sec. for the machine to return auto-
matically to the coffee mode.
12.2 Setting the Coffee Temperature
There are five temperature levels to
choose from. The coffee temperature
levels are defined as follows:
•«TEMPERATURE 1» = „luke warm“
•«TEMPERATURE 2» = „warm“
•«TEMPERATURE 3» = „normal“
•«TEMPERATURE 4» = „hot“
•«TEMPERATURE 5» = „extra hot“
The factory setting is
«TEMPERATURE 3». You can
change this setting as follows:
0 Press the „Menu“ key (Fig. 3, f) .
The menu point «LANGUAGE»
appears.
0 Press the paging keys or (Fig. 3, c
or d) until the menu point
«TEMPERATURE» appears.
0 Confirm the menu point with the „OK“
key (Fig. 3, g). The display shows the
current setting, e.g. «TEMPERATURE
3».
0 Where necessary select a different
temperature, using the paging keys
or (Fig. 3, c or d).
0 When the required temperature is indi-
cated, confirm this with the „OK“ key
(Fig. 3, g). This temperature is now pro-
grammed.
3
After programming, the display returns
automatically in the main menu to the
menu point «TEMPERATURE».
0 To return to the coffee mode, press the
„Menu“ key (Fig. 3, f) or wait ca.
30 sec. for the machine to return auto-
matically to the coffee mode.
12.3 Setting the Switch-off
Time
If the coffee machine is not used for a
set amount of time, it automatically
switches off for safety and economy
reasons.
You can choose between five switch-
off times (automatic switch-off after
1 to 5 hours):
« SHUT OFF TIME 1h » = 1 hour
«
SHUT OFF TIME 2h » = 2 hours
« SHUT OFF TIME 3h » = 3 hours
«
SHUT OFF TIME 4h » = 4 hours
« SHUT OFF TIME 5h » = 5 hours
The factory setting is « SHUT OFF
TIME 3h». You can change this set-
ting as follows:
0 Press the „Menu“ key (Fig. 3, f) .
The menu point «LANGUAGE»
appears.
0 Press the paging keys or (Fig. 3, c
or d) until the manu point «SHUT
OFF TIME» appears.
0 Confirm the menu point with the „OK“
key (Fig. 3, g). The display indicates the
current setting, e.g. «SHUT OFF
TIME 3h».
0 Where necessary, select a different
switch-off time with the paging keys
or (Fig. 3, c or d).
0 When the required switch-off time is
indicated, confirm this with the „OK“
key (Fig. 3, g). This switch-off time is
now programmed.
3
After the programming, the display
returns automatically in the main
menu to menu point «SHUT OFF
TIME».
0 To return to the coffee mode, press the
„Menu“ key (Fig. 3, f) or wait ca.
30 sec. for the machine to return auto-
matically to the coffee mode.
822_949_320 CP3500_denepf.book Seite 46 Freitag, 16. September 2005 12:04 00