COMPETENCE B1100-2 Le four encastrable commutable Mode d'emploi
Chère cliente, cher client, veuillez lire attentivement le présent mode d'emploi. Tenez surtout compte du chapitre «Consignes de sécurité» aux premières pages. Veuillez conserver ce mode d'emploi en vue d'une consultation ultérieure. Transmettez-le à un éventuel nouvel utilisateur de l’appareil. Les symboles suivants sont utilisés dans le texte: 1 Consignes de sécurité Avertissement: Conseils concernant votre propre sécurité. Attention: Conseils destinés à éviter d'endommager l'appareil.
Sommaire Sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Elimination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Description de l'appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Vue d'ensemble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Panneau de commande . . . . . . . . . . . .
Que faire si ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Données techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Dimensions intérieures du four . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Règlements, normes, directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Index de mots-clé . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Sécurité Sécurité électrique • L'appareil peut uniquement être raccordé par un électricien agréé. • En cas de défaut de l'appareil: enlevez les fusibles ou débranchez les disjoncteurs. • Pour des raisons de sécurité, il est interdit de nettoyer l'appareil avec un appareil à jet de vapeur ou à haute pression. • Les réparations de l'appareil doivent être effectuées uniquement par des professionnels. Les réparations effectuées de manière non conforme peuvent être la source de dangers considérables.
Pour éviter d'endommager l'appareil • Ne couvrez pas le four de film d'aluminium et ne placez pas de lèchefrite, platine de four, casserole, etc. sur le fond. L'émail pourrait être endommagé par l'accumulation de chaleur ainsi provoquée. • Les jus de fruits qui s'écoulent de la plaque de cuisson forment des taches indélébiles. Pour les gâteaux très humides, utilisez le plateau multi-usages. • Ne vous asseyez pas sur la porte ouverte du four. • Ne versez jamais d'eau directement dans le four chaud.
2 Elimination Eliminer le matériel d'emballage Tous les matériaux utilisés peuvent être réutilisés sans limites. Les matières plastiques sont identifiées de la manière suivante: • >PE< pour le polyéthylène, par ex. l'enveloppe extérieure et les sachets à l'intérieur. • >PS< pour la mousse de polystyrène, par ex. les rembourrages, qui sont toujours exempts de CFC.
Description de l'appareil Vue d'ensemble 8
Panneau de commande Equipement du four 9
Sortie de vapeur du four La vapeur sortant du four est guidée directement vers le haut via la sortie située à l'arrière de la table de cuisson. Accessoires du four Grille combinée Pour plats, moules à gâteaux, rôtis et grillades. Plateau multi-usages Pour gâteaux fondants, rôtis ou comme plaque à gâteau ou comme réceptacle pour la graisse.
Avant la première utilisation Régler l'heure 3 Le four ne fonctionne que si l'heure a été préalablement réglée. 1. Après le raccordement électrique ou une coupure de courant, le voyant horloge clignote D. 2. A l'aide des touches + ou - régler l'heure du jour. Attendre env. 5 secondes. Le voyant cesse de clignoter et l'horloge affiche l'heure du jour réglée. L'appareil est prêt à fonctionner.
Premier nettoyage Avant d'utiliser le four pour la première fois, vous devez le nettoyer. 1 Attention: N'utilisez pas d'agents de nettoyage agressifs ou abrasifs! La surface pourrait être endommagée. 3 Pour les faces frontales métalliques, utilisez un produit de nettoyage du commerce. 1. Mettez le sélecteur de fonction du four sur éclairage du four L. 2. Retirez tous les accessoires et gradins fils et nettoyez-les avec de l'eau savonneuse chaude. 3.
Commande du four Allumer le four en marche et l'éteindre 1. Tournez le sélecteur «Fonctions du four» pour sélectionner la fonction désirée. 2. Tournez le «Sélecteur de température» sur la température désirée. Le voyant jaune de fonctionnement reste allumé tant que le four ou les zones de cuisson sont en service. Le voyant rouge de température reste allumé tant que le four chauffe. 3. Pour éteindre le four, mettre le sélecteur «Fonctions du four» et le «Sélecteur de température» en position zéro.
Fonctions de four Les fonctions du four suivantes sont à votre disposition: L Eclairage du four Avec cette fonction, vous pouvez éclairer l'intérieur du four, p .ex. pour le nettoyer. Aucun élément chauffant n'est en service. O Voûte et sole Pour cuire au four et rôtir sur un niveau de gradin. Les éléments chauffants de la voûte et de la sole sont en service. J Voûte Pour cuire des pâtisseries et soufflés. L'élément chauffant de la voûte est en service.
Placer la grille et la platine universelle 3 Sécurité antibasculement Les grilles sont pourvues à gauche et à droite d'un léger renfoncement. Ce renfoncement sert de sécurité antibasculement et doit toujours être orienté vers l'arrière. Placer la platine ou la platine universelle: La sécurité antibasculement doit être vers l'arrière. ✘ Mettre la grille en place: Placez la grille de telle façon que les deux rails de guidage soient orientés vers le haut.
Utilisation de l'horloge électronique L'horloge électronique a les fonctions suivantes: Minuterie ] Pour régler la minuterie. Un signal sonore retentit lorsque la durée sélectionnée est écoulée. Cette fonction est sans effet sur le fonctionnement du four. Durée < Pour régler la durée pendant laquelle le four doit être en service. Fin > Pour régler le moment auquel le four doit être mis hors service. Heure du jour D Pour régler, modifier ou consulter l'heure.
3 Indications générales • Après avoir sélectionné une fonction de l'horloge, le voyant correspondant clignote pendant env. 5 secondes. Pendant ce temps, vous pouvez régler ou modifier les heures désirées avec les touches + ou -. • Après avoir réglé l'heure désirée, l'indicateur de fonction clignote encore pendant env. 5 secondes. L'indicateur de fonction reste ensuite allumé. La durée sélectionnée commence à s'écouler. • Vous pouvez arrêter le signal sonore en appuyant sur une touche quelconque.
Minuterie ] 1. Appuyez sur la touche de sélection Y jusqu'à ce que l'indicateur de fonction Fin ] clignote. 2. Avec les touches + ou -, réglez la durée de minuterie ] désirée. (max. 2 heures et 30 minutes). Après env. 5 secondes, l'affichage indique le temps restant. L'indicateur de fonction Minuterie ] s'allume. Lorsque la durée est écoulée, l'indicateur de fonction clignote et un signal sonore retentit pendant 2 minutes. 3. Vous pouvez arrêter le signal sonore en appuyant sur une touche quelconque.
Durée < 1. Appuyez sur la touche de sélection Y jusqu'à ce que l'indicateur de fonction Durée < clignote. 2. Avec les touches + ou -, réglez la durée de cuisson désirée. Après env. 5 secondes, l'affichage indique à nouveau l'heure. L'indicateur de fonction Durée < s'allume. Lorsque le temps est écoulé, l'indicateur de fonction clignote, un signal sonore retentit pendant 2 minutes et le four est mis hors service. 3.
Fin > 1. Appuyez sur la touche de sélection Y jusqu'à ce que l'indicateur de fonction Fin > clignote. 2. Avec les touches + ou -, réglez l'heure de fin de cuisson désirée. Après env. 5 secondes, l'affichage indique à nouveau l'heure. L'indicateur de fonction Fin > s'allume. Lorsque le temps est écoulé, l'indicateur de fonction clignote, un signal sonore retentit pendant 2 minutes et le four est mis hors service. 3.
Durée < et Fin > combinées 3 Vous pouvez utiliser Durée < et Fin > simultanément lorsque le four doit être mis automatiquement en service et hors service à un moment ultérieur. 1. Avec la fonction Durée <, réglez la durée de cuisson requise pour la préparation. Dans ce cas 1 heure. 2. Avec la fonction Fin >, réglez l'heure à laquelle la préparation doit être prête. Dans ce cas 14:05 heures. Les indicateurs de fonction Durée < et Fin > s'allument et l'heure est affichée à l'indicateur.
Modifier l'HEURE 3 L'heure du jour peut uniquement être modifiée lorsqu'aucune fonction automatique (Durée < ou Fin >) n'est programmée. 1. Appuyez sur la touche de sélection Y jusqu'à ce que l'indicateur de fonction HEURE clignote. 2. Avec les touches + ou -, réglez l'heure du jour. Après env. 5 secondes, le clignotement cesse et l'horloge affiche l'heure réglée. L'appareil est prêt à fonctionner.
Applications, tableaux et conseils Cuisson de pâtisseries au four Pour rôtir, utilisez la fonction du four voûte et sole O. Moules à gâteaux Les moules en métal foncé et les moules revêtus conviennent particulièrement pour voûte et sole O. Niveaux de gradins Cuire les gâteaux avec voûte et sole O n'est possible que sur un seul niveau de gradin à la fois.
3 Indications générales • Tenez compte de ce que les gradins sont comptés de bas en haut. • Placez l'inclinaison de la plaque à pâtisserie vers l'avant! • Placez toujours les moules à gâteaux au milieu de la grille. • Avec la fonction voûte et sole O, vous pouvez cuire dans deux moules simultanément. Placez alors les moules l'un à côté de l'autre sur la grille. Le temps de cuisson ne s'allonge que très peu.
Tableau de cuisson des pâtisseries Type de pâtisserie Niveau de Température gradin à ºC partir du bas Durée Gâteaux moulés Savarin ou kouglof 1 160-180 0:50-1:10 Gâteau de Savoie, cake 1 150-170 1:10-1:30 Tarte en pâte à biscuit 2 160-180 0:25-0:40 Fond de tarte en pâte brisée 3 190-2101 0:10-0:25 Fond de tarte en pâte molle/malaxée 3 170-190 0:20-0:25 Tarte aux pommes recouverte 1 170-190 0:50-1:00 Quiche Lorraine 1 180-200 0:30-1:10 Gâteau au fromage blanc 1 160-180 1:00-
Type de pâtisserie Niveau de Température gradin à ºC partir du bas Durée Pizza (avec garniture importante)2 1 190-2101 0:30-1:00 Pizza (mince) 1 230-2501 0:10-0:25 Pitta 1 230-2501 0:08-0:15 Wähen (CH) 1 210-2301 0:35-0:50 Petits gâteaux secs en pâte brisée 3 170-1901 0:06-0:20 Petits gâteaux secs (échaudés) 3 160-180 0:10-0:40 Petits gâteaux secs en pâte molle 3 170-190 0:15-0:20 Meringues 3 100-120 2:00-2:30 Macarons 3 120-140 0:30-0:60 Petits gâteaux secs en pâte le
Conseils pour la cuisson de pâtisseries Résultat de cuisson Cause possible Solution La base du gâteau est Hauteur d'enfournement introp claire correcte Placez le gâteau plus bas Le gâteau s'effondre (devient pâteux, collant, présente des bandes humides) Température de cuisson trop élevée Diminuez la température de cuisson Temps de cuisson trop court Allongez le temps de cuisson Une température de cuisson plus élevée ne permet pas de raccourcir les temps de cuisson Trop de liquide dans la pâte Emp
Rôtir Pour rôtir, utilisez la fonction du four voûte et sole O. Récipients pour le rôtissage • Tout plat résistant à la chaleur convient pour rôtir. • En cas d'utilisation de cocottes avec poignées en plastique, veiller à ce que ces dernières résistent à la chaleur. • Vous pouvez rôtir les gros rôtis directement dans la lèchefrite ou sur la grille placée au-dessus de la lèchefrite (p. ex. dinde, oie, 3-4 poulets, 3-4 jarrets).
Tableau de rôtissage Type de viande Quantité Poids Niveau de gradin à partir du bas Température ºC Durée h:min 1 200-250 2:00-2:30 Viande de boeuf Daube 1 -1,5 kg Rosbif ou filet par cm d'épaisseur 1 - saignant par cm d'épaisseur 1 230-2501 0:06-0:08 - à point par cm d'épaisseur 1 230-2501 0:08-0:10 - bien cuit par cm d'épaisseur 1 210-2301 0:10-0:12 Epaule, longe, jambon, 1 -1,5 kg 1 210-220 1:30-2:00 Côtelettes, côtelettes de porc salées et fumées 1 -1,5 kg 1 180-190 1
Niveau de gradin à partir du bas Température ºC Durée h:min jusqu'à 1 kg 3 220-2501 0:25-0:40 Selle de chevreuil/de cerf 1,5 -2 kg 1 210-220 1:00-1:30 Cuissot de chevreuil/de cerf 1,5 -2 kg 1 200-210 1:15-1:50 Morceaux de volaille 4-6 pièces par 200-250g 3 220-250 0:35-0:50 Demi-poulets 2-4 pièces par 400-500 g 3 220-250 0:35-0:50 Poulets, poularde 1 -1,5 kg 1 220-250 0:45-1:15 Canard 1,5 -2 kg 1 210-220 1:00-1:30 Oie 3,5 -5 kg 1 200-210 2:30-3:00 2,5 -3,5 kg 4-6 kg
Grillade en surface Pour griller, utilisez la fonction du four Gril F ou Maxi-gril Z avec le réglage de température z. 1 Attention: toujours griller avec la porte du four fermée. 3 Toujours préchauffer le four vide en position Gril pendant 5 minutes! Accessoires pour les grillades • Pour griller, utilisez en même temps la grille et le plateau multi-usages. Niveaux de gradins • Pour griller des aliments plats, utilisez principalement le 4e niveau de gradin à partir du bas.
Conserves Pour la mise en conserve, utilisez la fonction du four Sole Ü. Vaisselle à conserves • Pour la mise en conserve, utilisez exclusivement des bocaux à conserves du commerce de même taille. 3 Les bocaux à couvercle à fermeture quart de tour ou à fixation à baïonnette et les boîtes métalliques ne sont pas appropriés. Niveaux de gradins • Pour la mise en conserve, utilisez le 1er niveau de gradin à partir du bas.
Tableau des conserves Les durées et températures indiquées de mise en conserve sont indicatives.
Nettoyage et entretien 1 Avertissement: Pour des raisons de sécurité, il est interdit de nettoyer l'appareil avec un appareil à jet de vapeur ou à haute pression! Partie extérieure de la porte Essuyez la face frontale de l'appareil avec un chiffon doux et de l'eau savonneuse chaude. • N'employez pas de produits abrasifs, de produits de nettoyage décapants ni d'objets tranchants. • Pour les faces frontales métalliques, utilisez un produit de nettoyage du commerce.
Gradins fils Pour nettoyer les parois latérales, les gradins fils sont amovibles du côté gauche et du côté droit du four. Enlever un gradin fil Tirer d'abord le gradin à l'avant de la paroi du four (1) et ensuite le décrocher à l'arrière (2). Mettre en place le gradin fil 3 Important! Les extrémités arrondies des tiges de guidage doivent être orientées vers l'avant! Pour la mise en place, accrochez d'abord la grille dans le haut (1) et insérez-la ensuite à l'avant, puis appuyez dessus (2).
Eclairage du four 1 Avertissement: Risque d'électrocution! Avant de remplacer la lampe du four: – Mettez le four hors service! – Enlevez les fusibles ou débranchez les disjoncteurs de l'armoire à fusibles. 3 Placez un chiffon sur la sole du four afin de protéger la lampe du four et la vitre de protection. Remplacer la lampe latérale du four/nettoyer la vitre de protection 1. Enlevez la vitre de protection en la faisant tourner vers la gauche et nettoyez-la. 2.
Nettoyer la voûte du four Pour le nettoyage de la voûte du four, l'élément chauffant de la voûte peut être rabattu. Rabattre l'élément chauffant Avertissement: Ne rabattez l'élément chauffant que lorsque le four est hors service et qu'il n'y a plus de danger de brûlure! 1. Enlevez le gradin fil latéral. 2. Saisissez l'élément chauffant à l'avant et tirez-le vers l'avant audessus de l'estampage à la paroi intérieure du four. 3. L'élément chauffant se rabat vers le bas.
Porte du four Pour le nettoyage, vous pouvez démonter la porte du four de votre appareil. Décrocher la porte du four 1. Ouvrez complètement la porte du four. 2. Relevez complètement le levier de serrage couleur laiton aux deux charnières de la porte. 3. Saisissez la porte à deux mains sur les côtés et fermez-la jusqu’à sentir une résistance. Prolongez le mouvement en soutenant jusqu’au 3/4 de la fermeture. 4. Retirez la porte du four (Attention: lourde!). 5.
Porte vitrée du four La porte du four est équipée de trois vitres successives. Les vitres intérieures sont amovibles pour le nettoyage. 1 Avertissement: N'exécutez les étapes suivantes que sur la porte du four ayant été décrochée! En cas d'enlèvement de la vitre lorsque la porte est accrochée, celle-ci pourrait se refermer brutalement du fait de son allégement et vous blesser. 1 Attention: En cas d'application de force, surtout sur les arrêtes en verre de la face frontale, le verre peut se briser.
Remettre en place la vitre intermédiaire 1. Introduisez la vitre intermédiaire en oblique d'en haut dans le profil de porte du côté poignée. 2. Abaissez la vitre intermédiaire et faites-la glisser en direction de l'arête inférieure de la porte jusqu'à la butée en dessous du support inférieur. Remettre en place la vitre supérieure 1. Introduisez la vitre supérieure en oblique d'en haut dans le profil de porte du côté poignée. 2. Abaissez la vitre.
Que faire si ... Panne Cause possible Le four ne chauffe pas. Le four n'est pas sous tension. L'heure n'est pas réglée. Solution Enclenchez le four. Réglez l'heure. Les réglages nécessaires n'ont Vérifiez les réglages. pas été effectués. L'éclairage du four est en panne. Le fusible de l'installation domestique a disjoncté (armoire à fusibles). Vérifiez le fusible. Si les fusibles disjonctent plusieurs reprises, veuillez appeler un électricien autorisé. La lampe du four est grillée.
Données techniques Dimensions intérieures du four Hauteur x Largeur x Profondeur Volume (capacité utile) 31,0 cm x 40,5 cm x 43,5 cm 55 l Règlements, normes, directives Cet appareil est conforme aux normes suivantes: • EN 60 335-1 et EN 60 335-2-6 EN concernant la sécurité des appareils électriques à usage domestique et usages similaires et • EN 60 350 et aussi DIN 44546 / 44547 / 44548 concernant les caractéristiques d'utilisation de cuisinières électriques, tables de cuisson, fours et appareils pour gri
Index de mots-clé A P Accessoires . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Panneau de commande . . . . . . . . . . . . . . . . . 9 Plateau multi-usages . . . . . . . . . . . . . . . . . .10 Platine universelle . . . . . . . . . . . . . . . . . . . .15 Porte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 C Commande du four . . . . . . . . . . . . . . . . . . . 13 D Désactiver l'affichage de l'heure . . . . . . . . 17 Description de l'appareil . . . . . . . . . . . . . . .
Service au chapitre «Que faire si...» sont rassemblées les sources d’anomalie les plus fréquentes, auxquelles vous pouvez remédier vous-même. Si malgré toutes les vérifications une intervention s’avère nécessaire, le vendeur de votre appareil est le premier habilité à intervenir. A défaut (déménagement de votre part, femeture du magasin où vous avez effectué l’achat...), veuillez consulter l’Assistance Consommateurs qui vous communiquera alors l’adresse d’un service après vente.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.