COMPETENCE 5212 BU Build Under Double Oven Operating Instructions 27
Stand clear when opening the drop down oven IMPORTANT SAFETY INFORMATION doors. Support the doors using the handles until fully open. These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the information in this book contact the Customer Care Department.
CONTENTS FOR THE USER Important Safety Information Description of the Appliance Getting to Know Your Oven The Cooling Fan for the Controls Fan Selector Indicator Neon Pop In Pop Out Controls Fan Selector Button Before Using The Appliance 2 5 6 7 7 7 7 When First Switching On Rating Plate Condensation and Steam Cookware Grill and Oven Furniture 8 8 8 8 9 10 The Electronic Timer 11 The Dual Grill Uses of the Grill How To Use the Dual Grill Things To Note The Grill Pan and Handle Hints and Tips Grilling
FOR THE INSTALLER Technical Details Things You Need to Know Warnings Choice of Electrical Connection 53 54 54 54 Things to Note Preparing Cabinet for Fitting Oven How to Finish Unpacking 55 56 57 Making the Electrical Connections To Remove Cover of Mains Terminal Connecting to the Mains Terminal Checking Electrical Connections Connecting to a Hob or Cooker Point Fitting the Oven 58 58 59 60 60 61 Please read the whole instruction book before using the appliance.
DESCRIPTION OF THE APPLIANCE Built in electric double oven WARNING: THIS APPLIANCE MUST BE EARTHED Top Oven / Dual Grill Electronic Timer Control Knob Control Panel Multifunction Main Oven Your built in appliance comprises of an oven with conventional and fan assisted option and dual grill in the top compartment. The top oven is convenient and economical for mid-week use because of its size. The Multifunction main oven is the larger of the two ovens.
GETTING TO KNOW YOUR OVEN The Control Panel Electronic Timer Fan Selector Neon Indicator Fan Selector button for Top Oven Top Oven Indicator Neon Top Oven / Dual Grill Control Main Oven Indicator Neon Main Oven Temperature Control Multifunction Selector Oven Light Thermal Grilling Speedcook Defrost Pizza Function Conventional Oven Fan Oven 6
THE COOLING FAN FOR THE CONTROLS Your appliance has a cooling fan fitted behind the controls to prevent them from overheating. The cooling fan will come on immediately when grilling or using thermal grill in the top compartment. The cooling fan may come on after a short time when the top or main oven are in use. The cooling fan may cycle on and off when the appliance is in use. This is quite normal. NOTE The action of the cooling fan will depend on how long the ovens have been in use and what temperature.
BEFORE USING THE APPLIANCE WHEN FIRST SWITCHING ON The timer must be set to manual operation before the Main oven can be operated. This must be done whenever the appliance is switched off at the wall or when there has been a power failure. For instructions on how to set the timer see page 11. If the control knob surround does not illuminate when the oven temperature control is turned, it is most likely that the timer is set for automatic cooking.
COOKWARE Baking trays, dishes etc., should not be placed directly against the grid covering the fan at the back of the oven. Do not use baking trays larger than 30cm x 35cm (12" x 14") as they will restrict the circulation of heat and may affect performance. Advice on the effect of different materials and finishes of bakeware is given in 'Hints and Tips' in the appropriate oven section.
GRILL AND OVEN FURNITURE The following items of oven furniture have been supplied with the appliance. 1 grill pan 1 grill pan handle 1 grill pan grid 1 grill deflector 1 meat tin 2 shelves for grilling and Top oven cooking 2 shelves for main oven cooking The grill deflector sits above the grill element and prevents fat splashing onto the grill roof. The deflector may be easily removed for cleaning. Scuffing of the Stayclean panel/s by the oven furniture pack may occur during transit.
THE ELECTRONIC TIMER The electronic timer can indicate the time of day, operate as a minute minder and automatically time the Main oven. Cookpot Symbol Auto Symbol A Auto Symbol ( automatic cooking ) Bell Symbol ( minute minder ) Cookpot Symbol ( manual cooking ) Bell Symbol Please note that this is a 24 hour clock, for example 2pm is shown as 14.00. If the oven is switched off at the wall or there is loss of power the clock will stop and you will not be able to use the appliance.
AUTOMATIC TIMER CONTROL The automatic timer can be used with the Multifunction oven only. TO SWITCH THE MULTIFUNCTION OVEN ON AND OFF AUTOMATICALLY 1. Ensure the clock is showing the correct time of day. 2. Place food in the Multifunction oven. 3. Set the length of time you want the food to cook for by pressing and releasing the button and then pressing the + button until the correct cooking time is displayed. This must be completed within 5 seconds of pressing the button.
5. Turn the oven control to the correct temperature and select the required function using the Multifunction Selector. The clock will work out what time the oven will switch itself on and will switch the oven off at the end. An audible signal will sound when cooking is complete. To cancel the alarm, see below.
At the end of the cooktime the oven will switch off, the alarm will sound and the auto symbol will flash. 5. To cancel and return to manual operation press buttons and together. 6. Turn off the oven temperature control and Multifunction Selector.
THE DUAL GRILL WARNING Accessible parts become hot when the grill is in use. Keep children away. USES OF THE GRILL The grill is situated in the Top oven compartment. The grill is a dual circuit grill which means that the full area of the grill or the centre section only can be used. Use the full grill for cooking larger quantities of food. Use the centre section for economy purposes when cooking smaller quantities. HOW TO USE THE DUAL GRILL 1. Open the Grill / Top Oven door. 2.
THE GRILL PAN AND HANDLE The grill pan has a removable handle. To insert the handle, press the button on the handle with the thumb and pivot the handle slightly upwards inserting the lip into widest part of the bracket. Move the handle towards the left, lower into position and release the button. Ensure the handle is positively located. To remove the handle, press the button on the handle with the thumb and pivot the handle slightly upwards and towards the right to remove from the bracket.
The grill pan grid is reversible. This is useful if you want to cook foods of varying thickness. As a general rule, bread for toasting should be placed on the grid in the ' high ' position in the grill pan. Foods such as chicken pieces or chops may be grilled using the grilling grid in the low position. Food should be thoroughly dried before grilling to minimise splashing. Brush lean meats and fish lightly with a little oil or melted butter to keep them moist during cooking.
GRILLING CHART The chart below gives recommended cooking times and shelf positions. Remember that these are a guide and should be adjusted to suit personal taste. Note Shelf positions are counted from the bottom upwards.
THE FAN ASSISTED TOP OVEN USES OF THE FAN ASSISTED OVEN The Top oven is the smaller of the two ovens. It is convenient for mid-week meals where smaller quantities or convenience foods are being cooked. It is important to refer to the Top oven cooking chart as a guide to shelf positions and temperatures as these may differ from previous appliance's you may have used. HOW TO USE THE FAN ASSISTED OVEN 1. Push out and turn the Grill / Top oven temperature control clockwise to the required setting. 2.
HINTS AND TIPS Use the Top oven when you want to warm plates. Use a setting of 80°C - 100°C on the oven temperature control. You can use both shelves when using the fan assisted oven. There should always be at least 2.5cm (1") between the top of the food and the grill element. This gives best cooking results and allows room for rise in yeast mixtures, Yorkshire puddings etc. When cooking cakes, pastry, scones bread etc., place the tins or baking trays centrally on the shelf.
THE CONVENTIONAL TOP OVEN USES OF THE CONVENTIONAL OVEN This form of cooking gives you the opportunity to cook without the fan in operation. It is particularly suitable for some cook chilled convenience foods and dishes which require extra base browning such as pizzas, quiches and flans. Gratin's, lasagne and hotpots which require extra top browning also cook well in the conventional oven. For best results cook on one level. HOW TO USE THE CONVENTIONAL OVEN 1. Push in the Fan Selector button. 2.
HINTS AND TIPS 5 4 3 2 1 The middle shelf allows for the best heat distribution. To increase base browning simply lower the shelf position. To increase top browning, raise the shelf position. The material and finish of the baking trays and dishes used will affect base browning. Enamelware, dark heavy or non-stick utensils increase base browning, while oven glassware, shiny aluminium or polished steel trays reflect the heat away and give less base browning.
TOP OVEN COOKING CHART The oven temperatures are intended as a guide only. It may be necessary to increase or decrease the temperatures by a further 10°C to suit individual preferences and requirements. Note: Shelf positions are counted from the bottom of the oven.
THERMAL GRILLING IN THE TOP OVEN USES OF THERMAL GRILLING Thermal grilling in the Top oven offers an alternative method of cooking food items normally associated with conventional grilling. The grill element and the oven fan operate together, circulating hot air around the food. The need to check and turn food is reduced. Thermal grilling helps to minimise cooking smells in the kitchen and allows you to grill with the oven door closed.
THINGS TO NOTE Shelf position 3 is suitable for most foods. Setting is suitable for most thicker foods such as chicken quarters and pork chops. Setting is suitable for foods such as bacon. The control knob surround will illuminate. The top oven indicator neon will illuminate. It will turn on and off during cooking to show that the temperature is being maintained. The Selector indicator throughout cooking. neon will glow The oven fan will operate continually during thermal grilling.
Turn food over during cooking as necessary. Ensure that ready prepared or cooked chilled dishes e.g. shepherds pie, moussaka, lasagne, etc., are piping hot throughout before serving. Be prepared to make suitable adjustments to the grill setting during cooking to suit individual requirements. It may be necessary to turn down as required. If thermal grilling on more than one level, it may be necessary to interchange the food on the shelves during cooking.
TO DEFROST IN THE TOP OVEN USES OF DEFROST This function enables you to defrost most foods without heat faster than some conventional methods as the oven fan circulates air around the food. It is particularly suitable for defrosting delicate frozen foods which are to be served cold e.g. cream filled gateaux, cakes covered with icings or frostings, cheesecakes, biscuits, scones etc. HOW TO DEFROST 1. Press out the Fan Selector button. 2. The Dual grill / Top oven control should be in the Off '0' position.
Joints of meat up to 2kg/4½lb in weight can be thawed using the defrost function. All joints of meat and poultry must be thawed thoroughly before cooking. DO NOT leave food at room temperature once it is defrosted. Cook raw food immediately or store cooked food in the fridge, once it has cooled. Care must always be taken when handling foods in the home.
THE MAIN FAN OVEN USES OF THE FAN OVEN The fan oven is particularly suitable for cooking larger quantities of food. The advantages of fan oven cooking are: PREHEATING The fan oven quickly reaches its temperature so it not usually necessary to preheat the oven. Without preheating however you may need to add an extra 5 - 10 minutes on the recommended cooking times. For recipes needing high temperatures e.g. bread, pastries, scones, soufflés etc., best results are achieved if the oven is preheated first.
TO FIT THE MAIN OVEN SHELVES The shelves should be fitted with the straight rods uppermost on the frame and the forms towards the back of the oven. If not fitted correctly the anti-tilt and safety stop mechanism will be affected. HINTS AND TIPS Arrange the shelves in the required positions before switching the oven on. Shelves are numbered from the bottom upwards.
THE CONVENTIONAL OVEN USES OF THE CONVENTIONAL OVEN This form of cooking gives you the opportunity to cook without the fan in operation. It is particularly suitable for dishes which require extra base browning such as pies, quiches and flans. Gratin's, lasagne and hotpots which require extra top browning also cook well in the conventional oven. For best results cook on one level. HOW TO USE THE CONVENTIONAL OVEN 1. Push out and turn the Selector to Conventional Oven. 2.
HINTS AND TIPS The middle shelf allows for the best heat distribution. To increase base browning simply lower the shelf position. To increase top browning, raise the shelf position. The material and finish of the baking trays and dishes used will affect base browning. Enamelware, dark heavy or non-stick utensils increase base browning, while oven glassware, shiny aluminium or polished steel trays reflect the heat away and give less base browning.
MAIN OVEN COOKING CHART The oven temperatures are intended as a guide only. It may be necessary to increase or decrease the temperatures by a further 10°C to suit individual preferences and requirements. Note: Shelf positions are counted from the bottom of the oven.
PIZZA FUNCTION USES OF PIZZA FUNCTION This setting can be used for foods such as pizza where base browning and crispness are required. The top and lower elements operate in conjunction with the oven fan. HOW TO USE PIZZA FUNCTION 1. Push out and turn the Selector to Pizza setting. 2. Push out and turn the main oven temperature control to the required setting. THINGS TO NOTE The control surrounds will illuminate.
DEFROSTING IN THE MAIN OVEN USES OF DEFROST FEATURE This main oven function enables you to defrost most foods without heat faster than some conventional methods as the oven fan circulates air around the food. It is particularly suitable for delicate frozen foods which are to be served cold e.g. cream filled gateaux, cakes covered with icings or frostings, cheesecakes, biscuits, scones etc. HOW TO DEFROST 1. Push out and turn the Selector to Defrost setting. 2.
A 1kg/2¼lb oven ready chicken will be thawed in approximately 5 hours. Remove the giblets as soon as possible during the thawing process. Joints of meat up to 2kg/4½lb in weight can be thawed using the defrost function. All joints of meat and poultry must be thawed thoroughly before cooking. Always cook thoroughly immediately after thawing. DO NOT leave food at room temperature once it is defrosted. Cook raw food immediately or store cooked food in the fridge, once it has cooled.
SPEEDCOOK FUNCTION USES OF SPEEDCOOK Speedcook is ideal for quick preheating of the oven before selecting an alternative cooking function. It can also be used for cooking chilled and frozen convenience foods without the need for preheating. COOKING TIMES Cooking times for convenience foods should be the same or slightly quicker than those stated on the packaging. This may vary depending on the dish and the quantity being cooked. HOW TO USE SPEEDCOOK 1. Push out and turn the Selector to Speedcook. 2.
HINTS AND TIPS Single level cooking using the middle shelf gives best results. Frozen and cook chilled foods can be cooked using Speedcook without the need for preheating. Use Speedcook for all types of frozen / cook chilled convenience foods to given even browning and crispness where crispness is required. The material and finish of the baking trays and dishes used will affect base browning.
THERMAL GRILLING IN THE MAIN OVEN USES OF THERMAL GRILLING Thermal grilling in the main oven offers an alternative method of cooking food items normally associated with conventional grilling. Thermal grilling helps to minimise cooking smells in the kitchen and allows you to grill with the oven door closed. The need to check and turn food is reduced. With the exception of toast and rare steaks you can thermal grill all the foods you would normally cook under a conventional grill.
THINGS TO NOTE The control surrounds will illuminate. The oven indicator neon will illuminate. It may turn on and off during cooking to ensure the temperature is maintained. The oven fan will operate continually during thermal grilling. The oven light will come on when the selector is set. The cooling fan for the controls may operate after a time. It may run on after the controls are switched off until the appliance has cooled. See page 7 for more details on the operation of the cooling fan.
Foods will cook more quickly the closer they are to the grill element and the higher the temperatures selected. Be prepared to adjust temperatures and shelf positions during cooking if necessary. Turn food over during cooking as necessary. Ensure that ready prepared or cooked chilled dishes e.g. shepherds pie, moussaka, lasagne, etc., are piping hot throughout before serving. A temperature range of 140°-220°C and shelf positions 9 and 10 are suitable for most foods.
CARE AND CLEANING Before cleaning the appliance always allow the cooling fan for the controls to cool the appliance down before switching off the electricity supply. CLEANING MATERIALS Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer. Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives should also be avoided.
TO REMOVE THE OUTER GLASS 1. Open the oven door slightly to gain access to the two cross head screws on the top of the oven door. 2. Loosen the two screws using a Pozidrive screwdriver. Grill Door Trim 3. Holding the door glass securely in place with one hand remove the screws and washers with the other hand. The screws and washers retain the trim on the top of the grill door. Note the position of the trim on the door. 4.
TO REPLACE THE OUTER DOOR GLASS 1. Holding the door glass panel with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door. 2. Holding the door glass with your left hand, use your right hand to open the oven door. Bring the door gently towards the glass panel ensuring the screw location holes line up. 3. Place the trim in the correct position on the top of the grill door. 4.
CARE OF STAYCLEAN SURFACES The roofs and sides of both ovens and the main oven back panel are coated with a Stayclean finish. They should not be cleaned manually. Aerosol cleaners must not be used on Stayclean surfaces and must not come into contact with elements or the door seal, as this may cause damage. During normal use the Stayclean coating will become splashed with fats and food residues. By running the oven without food, the Stayclean surfaces burn off any soilage.
HINTS AND TIPS Slight discolouration and polishing of the Stayclean surfaces may occur in time, but this will not affect their self cleaning properties. A good time to use the oven cleaning cycle is after the weekly roast. If you do a lot of roasting and very little baking you should follow the cleaning cycle every week. If you roast very little you will only need to follow the cleaning cycle every 2 - 3 weeks. Follow the recommendations below to keep soilage to a minimum.
TO REMOVE THE WIREWORK RUNNERS The wirework runners in both ovens can be removed for cleaning. 1. Remove all shelves and furniture from the oven. 2. Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven. 3. Support the side panel at the bottom. 4. Unhook the runner and side panel at the top and remove them from the cavity. 5. To replace, ensure the side panel is assembled onto the wirework runner before hooking it back into the oven.
THE OVEN LIGHTS The oven light illuminates the main oven when the Selector is turned to . The top oven light illuminates when the oven temperature control is turned. REPLACING AN OVEN LIGHT BULB Isolate the appliance from the electricity supply before replacing the bulb. The type of bulb required is a 300°C, 25 watt small Edison Screw. 1. Make sure the appliance is cool before you replace a bulb. 2. Open the oven door and remove the shelves wirework runners and side panels.
IF SOMETHING DOESN'T WORK Please carry out the following checks on your appliance before calling a Service Engineer. It may be that the problem is a simple one which you can solve yourself without the expense of a service call. If our Service Engineer finds that the problem is listed below you will be charged for the call whether or not the appliance is under guarantee.
The oven light fails to illuminate The oven light bulb may need replacing see page 48. If the Main Oven is set for automatic cooking the light will illuminate when the cook time begins. The oven fan is noisy Check that the oven is level. Check that shelves and bakeware are not vibrating in contact with the oven back panel. The oven temperature is too high or low Check that the recommended temperatures and shelf positions are being used. See pages 23 and 33.
GUARANTEE CONDITIONS Standard guarantee conditions AEG offer the following guarantee to the first purchaser of this appliance: 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation. The guarantee does not cover commercial use. 2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty material.
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: Before calling out an engineer, please ensure you have read the details under the heading 'If Something Doesn't Work'. 0870 5 929929 When you contact your local Service Force Centre you will need to give the following details: Your call will be routed to your local Service Force Centre covering your post code area.
INSTALLATION INSTRUCTIONS Voltage: 230\240 Volts AC 50Hz Loading Info: Top Oven* 1.7kW Dual Grill: 2.8kW Single Grill 1.4kW Main Oven Fan Element: 2.5kW Fan Motor: 0.03kW Oven Light: 0.05kW Wattage: 5.0\5.5kW Height: 720 mm Width: 593 mm Depth: 585 mm (excluding handles and knobs) * Cannot be used at the same time as the grill element. This appliance complies with: European Council Directive 73/23/EEC. EMC Directive 89/336/EEC. CE Marking Directive 93/68/EEC.
INSTALLATION INSTRUCTIONS THINGS YOU NEED TO KNOW WARNINGS: WARNINGS: This appliance must be installed by a qualified electrician/competent person. Safety may be impaired if installation is not carried out in accordance with these instructions. This appliance must be earthed. Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig. 1).
INSTALLATION INSTRUCTIONS NOTE: It is good practice to: Fit an Earth Leakage Circuit Breaker to your house wiring. Wire your appliance to the latest IEE regulations. THINGS TO NOTE This appliance is designed to be fitted between cabinets with the recommended dimensions as shown in Fig. 3 & 4. If there is an existing housing unit it must be removed. Fig. 3 The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN60-335.
INSTALLATION INSTRUCTIONS PREPARING CABINET FOR FITTING OVEN Make sure the space between the cabinets is the correct size for the appliance to be fitted (Ref. Fig. 5 & 6). The plinth board spanning the space into which the appliance is to be installed should be removed. Fig. 5 If the size between adjacent cabinets is 605-610*mm, then the cabinets should be modified so that the recommended dimension of at least 600-605mm is maintained.
INSTALLATION INSTRUCTIONS Check that the mounting brackets are level. They can be adjusted if necessary by using the extra holes at the ends of the brackets. Once the brackets are level, drill a pilot hole through the central hole in the bracket and fit the remaining screw. HOW TO FINISH UNPACKING Place packed appliance next to the space in which it will be installed. See Fig. 8.
INSTALLATION INSTRUCTIONS TO REMOVE COVER OF MAINS TERMINAL From the rear of the appliance, remove mains input terminal cover to gain access to terminal block. First remove retaining screw with pozidrive screwdriver. See Fig. 9. Fig. 9 Prise cover loose using screwdriver in position (1) then lever off with screwdriver in position (2) at either side. See Fig. 10. Fig. 10 Lift cover and remove screw from cable clamp. See Fig. 11. Fig.
INSTALLATION INSTRUCTIONS CONNECTING TO THE MAINS TERMINAL Warning: earthed. This appliance must be We recommend you use a new length of 6mm2 twin core and earthed cable to ensure your safety. Make connection as shown in Fig. 12 by proceeding as follows:Preform wires to the appropriate shape to suit fitting into the mains terminal block. Strip inner insulation wirestrippers. on wires using Fig. 12 Twist the bared wires using pliers. Cut bared wires 10mm away from the end of the inner insulation.
INSTALLATION INSTRUCTIONS CHECKING ELECTRICAL CONNECTIONS Confirm the appliance is correctly connected by switching on and observing the various oven functions indicators. The electronic timer will flash on and off. CONNECTING TO A HOB OR COOKER POINT Either follow in general terms the instructions for connecting to the terminal block or refer to the hob suppliers installation instructions. Feed the cable through the cabinet and arrange to route the cable away from the appliance.
INSTALLATION INSTRUCTIONS FITTING INTO THE SPACE BETWEEN CABINETS IMPORTANT: Ensure that the oven is switched off at the wall before any further work is carried out. Ensure the appliance is in front of the cabinet. See Fig. 13. Take out all oven furniture before installation to reduce the weight you need to lift. To place the appliance into the space between cabinetry follow the procedure below: N.B. Two people will be required to carry out the lifting procedure.
Place the heat deflector flush with the edge of the worksurface, (see Fig. 15) with the cork spacers upover (see Fig.16) and screw into position using the screws supplied with the appliance. WORK TOP HEAT SHIELD. LEVEL WITH FRONT EDGE OF WORK TOP Failure to do this may cause damage to the underside of the work surface. Replace the plinth board. Switch on the appliance and refer the user to the operating instructions. TOP OVEN DOOR Fig.15 Fig.
NOTES 63
IMPORTANT NOTICE In line with our continuing policy of research and development, we reserve the right to alter models and specifications without prior notice. This instruction booklet is accurate at the date of printing, but will be superseded if specifications or appearance are changed. AEG DOMESTIC APPLIANCES 55 - 77 HIGH STREET, SLOUGH, BERKSHIRE, SL1 1DZ TELEPHONE 0870 5 350350 http://www.aeghome.co.