Operation Manual
71
ENGLISH
• Press -/- - to display the channel list. Press the arrow buttons ( ) to highlight a channel and press ENTER to
display the channel on screen.
6.3 Adjust Volume
• Press the VOL
/ , buttons to adjust the volume.
• Press the MUTE button to temporarily mute the sound. Press MUTE or VOL
to unmute the sound again.
6.4 Shortcuts
AUDIO Select audio language (only if supported by broadcaster)
SOURCE Select external device
PMODE Select picture mode
SMODE Select sound mode
SLEEP Set sleep timer
ASPECT Select aspect ratio
TEXT Access Teletext
INFO Display channel information
SUBTITLE Select subtitle language (only if supported by broadcaster)
6.5 OSD Menu Structure
The OSD (On Screen Display) menu serves to select and set the dierent functions.
1. Press the MENU button to display the OSD menu. The main
menu items are shown above.
2. First press / to select the desired main menu item. The sub-
menus are displayed below.
3. Press the arrow button to select a submenu. The rst row of
the submenu is highlighted.
4. Press ENTER or to activate a submenu.
5. Press the MENU button to return to the main menu.
Submenus
• Press the arrow buttons / to select a submenu item. Here you can:
- either perform settings with the arrow buttons / .
- or press ENTER to open a further setting window and perform settings here with the arrow buttons / .
Return to Main Menu
To select a dierent item from the main menu rst exit the active submenu.
• Press the MENU button to return step by step until the main menu header (e.g. CHANNEL) is highlighted in colour.
• In the submenu press the button until the main menu header (e.g. CHANNEL) is highlighted in colour.
Exit Menus
• Press the MENU button to exit the menus step by step or press the EXIT button to exit the menu. Your changes are
saved.
NOTE: After a few seconds idling the menu disappears automatically.