Operation Manual
76
ENGLISH
• To review alle scheduled programmes select in the main menu CHANNEL, press the arrow button to select Recorder
Schedule List and press the arrow button
.
9.4 Programmed Recording with EPG (Electronic Programme Guide)
1. Press the EPG button to access the electronic programme guide.
2. Press the arrow buttons to select the desired channel and/or programme.
3. Press the
REPEAT / SUBTITLE button. The recorder window is displayed.
4. Press ENTER to conrm the entered times.
Programming is nished and the dates are shown in the Recorder Schedule List.
9.5 PVR Playback
1. Press the INDEX / GOTO button to display your recordings.
2. Repeatedly press the INDEX / GOTO button to sort the recordings by Programme, Channel, Time.
3. Press
/ to select the desired recording.
4. Press to start playback.
5. Press to end playback.
NOTE:
Press the T.SHIFT / ZOOM button to pause playback ( see “9.6 Time Shift Function” on page 76).
9.6 Time Shift Function
The time shift function allows you to interrupt a programme and to continue viewing it later. A USB device with su-
cient capacity must be connected. Time shift size list set after formatting (
see “9.1 PVR Settings” on page 74).
1. Press the T.SHIFT / ZOOM button. The image is “frozen”. On the bottom of the screen the elapsed time is displayed.
2. Press
to activate time shift playback.
NOTE:
Press EXIT to hide the info bar. The time shift logo is displayed bottom left on the screen.
3. Press
/ to skip forward and back in the time window.
4. Press / to activate the search.
5. Press T.SHIFT / ZOOM to pause playback again.
Press
to exit the function.
A-B Repeat
In time shift mode you can dene a section to be automatically repeated. This is indicated with the letters A and B below
the playback icon.
1. In time shift playback mode press
once to mark the starting point of the section to be repeated.
2. Press again to mark the end point of the section to be repeated. The marked section is now repeated.
Press the
button to stop repeat mode.