Operation Manual

80
ENGLISH
13.2 On Time and O Time
On Time and O Time dene the time when the TV set turns on and o. You can dene dierent periods.
NOTE:
These functions turn your TV set on from standby mode or into standby mode. If your TV set is turned o with the main
switch this functions is invalid.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight O Time or On Time.
4. Press ENTER to access the function.
5. Press the arrow buttons to highlight and change the displayed
functions.
O Time:
- Repeat: Dene if the setting is to be performed once or regu-
larly. Select between: (O, Once, Daily, Mon-Fri, Mon-Sat, Sat-
Sun or Sun).
- Hour / Minute: Set the o time.
On Time:
- Activate: Dene if the setting is to be performed once or regularly. Select between: (O, Once, Daily, Mon-Fri,
Mon-Sat, Sat-Sun or Sun).
- Hour / Minute: Set the on time.
- Volume: Set the volume that the TV set turns on with.
- Mode: DTV - if DVBT antenna is connected / ATV – if external antenna or cable tuner is connected / RADIO if avail-
able the TV set can turn on with a radio station.
- Num: Set the cahnnel number that the TV set turns on with.
6. Press EXIT to exit the menu or press MENU to return to the previous menu. The changes are saved.
13.3 Sleep Timer
You can set your TV set to automatically turn o after a preset period of time. The sleep timer is deleted and must be set
again if you turn the TV set o during sleep timer setting. Set the sleep timer interval between O and 240Min.
• Repeatedly press the SLEEP button on the remote control until the desired time is displayed. The menu disappears
after a few seconds and the TV set turns o after the preset interval.
NOTE: You can also perform this setting in the TIME menu.
13.4 Auto Sleep
With auto sleep activated the TV set automatically turns into standby mode after not receiving a signal for 10 minutes.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button
until the menu TIME is activated.
3. Press the arrow button to highlight Auto Sleep.
4. Press to activate or deactivate the function.
5. Press EXIT to exit the menu and save the changes.
13.5 Time Zone
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button
until the menu TIME is activated.
3. Press the arrow button to highlight Time Zone.
4. Press the arrow buttons / to select the desired time zone.
5. Press EXIT to exit the menu and save the changes.