Operation Manual

36
Problem Possible cause/solution
Only one sound channel.
Check balance settings in VIDEO menu.
Good image, but no sound.
Check if the sound is muted?
Press MUTE.
Check if the sound is set very low?
Press VOL +.
TV set turns off.
Check if the off timer is activated if no channel is received?
No response to buttons;
Teletext rolls.
Turn the TV set off at the main switch and turn on again after a
moment.
16. TECHNICAL DATA
Electrical data
Power supply: Input: 100 - 240 V ~ 50/60 Hz
Power consumption max.:
60W
Power consumption in standby mode: < 1 W
Screen
Screen diagonal:
24" /61 cm
Aspect ratio:
16:9 (4:3 selectable) + Zoom 1+2
Resolution:
1920 x 1080
Audio
Audio output: 2 x 3 W
Reception
Channel options: 100
Channels:
VHF band I channel2 - 4
VHF band III channel 5 - 12
UHF channel 21 - 69
TV system: PAL B/G, D/K, I / SECAM B/G, D/K, L, LL
Inputs
Euro-AV: SCART
AV:
1 x RCA / 1 x S-Video
PC: 1 x VGA D-SUB / 1 x PC audio stereo jack
Component: Y Pb Pr
SPDIF out (digital audio); SPDIF out
HDMI: HDMI
Antenna: 75 Ohm
Remote Control
Batteries: 2 x type LR03/AAA
LED class: 1
General
Dimensions (W x D x H):
577 x 170 x 427 mm (incl. foot)
Weight:
approx. 5.7kg
Operating temperature: 10°C - 35°C
Manual ID: E41456/PE/2009
Subject to changes without prior notice.