Operation Manual

English
35
Submenus
• Pressthearrowbuttons
/ toselectasubmenuitem.Hereyoucan:
- either perform settings with the arrow buttons
/ .
- or press OK to open a further setting window and perform settings here with the arrow buttons
/ .
Return to Main Menu
Toselectadifferentitemfromthemainmenurstexittheactivesubmenu.
• RepeatedlypressTV MENUuntilthemainmenuheader(e.g.CHANNEL)ishighlighted.
Exit Menus
• PresstheTV MENUuttontoexitthemenusstepbysteporpresstheEXIT button to exit the menu. Your changes are
saved.
NOTE: Afterafewsecondsidlingthemenudisappearsautomatically.
7. Search and Edit Channel
YourTVsetcanreceiveDVB-Tsignalsaswellasconventionalanaloguesignals(e.g.viacable).Thestationswhichcanbe
receiveddependontheselectionoftheinputsignal:yourDVB-TantennaforDVB-Treceptionoranaloguecabletuner.
Bothmethodscanbesavedinthechannellist–butgenerallyyouwillonlyuseonekindofreception.
• DVB-TchannelsaredisplayedasDTVintheOSDmenu.
• AnaloguechannelsaredisplayedasATVintheOSDmenu.
7.1 Channel Search
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Press in CHANNEL menu to select Auto Tuning.
3. PressOK.Press
/ to select one of three tuning methods
(DTV+ATV,DTV,ATV).Nowpress
.
4. Then press toselectthecountryasyourlocation.
5. PressOKtostartChannelSearch.Thiswilltakeafewminutes.The
progress is shown on screen.
6. Afterautoscanchannel1isdisplayed.
7. ThewindowclosesautomaticallyafterafewsecondsorpressEXIT
to close it.
7.2 DTV Manual Scan
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Pressthearrowbutton
to select item DTV Manual Tuning and press OK.
3. Pressthearrowbuttons / to select a channel. The signal strength of the selected
channelisdisplayed.IfnosignalisreceivedontheselectedchannelNOSIGNALis
displayed.Inthiscaseselectadifferentchannel.
4. PressOK to start the manual scan.
5. Afternishingthemanualscanthenumberoffoundchannelsisdisplayed.PressEXIT
to close the window.
7.3 ATV Manual Scan
Toreceiveanaloguechannelsananalogueantennasignal(e.g.cabletuner)mustbeconnected.Analoguechannelsare
displayedasATV(TV)intheOSDmenu.IfpreviouslyDVB-Tchannelsweresavedthenewanaloguechannelisaddedto
this list. The digital channels are not overwritten.